I have a Kenmore 80 series 110.92480200 washing machine. When it went to the spin cycle it made a loud noise and it makes this whining noise as it tries to spin but doesn't. What do you think the problem is??
The drive coupling has probably broken. Usually happens when you overload the machine. Easy fix. READ MORE
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Part number 285753
When you replaced the case you probably pinched the air tight tube that runs from the bottom of the tub up to that water level switch. If it cannot judge the water level pressure then the water will just keep on comin in. If that ain't it then remove the hose from the switch and blow the sediment out anyway so the air pressure can make the switch work all propah.
×
569 views
Usually answered in minutes!
Thank you so much for your response....I am looking up the part for my machine and it guess what you are mentioning is the same as a coupling motor??
I fixed the coupling and now that works. I filled the machine and started it....sometime later I came back to check it and water was all over my garage and floors. I guess it keeps filling with water but at the next cycle it refills? Do you know what I did? Probably didn't put something back together.....your input would be greatly appreciated!!
Thank you!!
×