At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure that the radiator is full and if you still dont have hot air then check to see if the top rad hose and the bottom rad hose are hot after driving for 30 minutes. Now if the bottom rad hose is not as hot as the top hose then replace the thermostat. If both the hoses are hot then check the two hoses going into heater core at the fire wall, both of the hoses should be hot, if not then problem is in the heater core.
Sounds like the heater core may be blocked..First check the level make sure its full..Then let the vehicle get up to operating temperature..Feel the heater hoses going into the firewall..Both should be hot to touch..If one is hot and the other one is warm or not warm ,,then you have a blockage in the heater core..If its block ,,then i have cleaned them out by taking the heater hoses off,,and running a garden hose through the heater core..If that doesnt work then you have to remove the dash,,and replace the heater core..
take your tstat off jump out the wires red green white together. if it works like that then your thermostat is bad. if it doesnt then it is in the unit.
It sounds like the thermostat is loose and needs to be adjusted or replaced. Leave this to a professional if you don't know what you're doing. So many fires are caused by baseboard heaters.
sounds like heater control valve situated under scullle panel common fault on ka set heater fan switch half way between hot and cold with heater blowing then touch valve if pulsing or clicking noise it is faulty if doesnt solve problem faulty switch
Most washing machines do not heat water, they merely let the hot water into the wash tub that comes from your house hot water heater.... when selecting warm, hot and cold water will be mixed together to get warm or when selecting cold.. only the cold water is allowed into the wash tub.. Please provide brand and model number of machine so I can tailor a reply toward your specific washer...
×