G3vacuum handle is notsttandup
SOURCE: How do I change the fan in a Kirby G3 vacuum cleaner
See this MANUAL. Let me know if it helped
SOURCE: kirby g3 tech drive
so when u pull it back it's like it's not engaged at all? then it maybe the reverse is out....with the fwd soon to follow. remember the vac is 20yrs old; & working that long? it definately served it's purpose.
depending how much money you wanna spend on it buying a new or used trans. plus labor...or just an ebay used unit.
SOURCE: replace wheel axle on my kirby g3 vacuum. have a
The spring goes inside that pedal that you step on to advance the height. Place that spring in that pedal and then place the pedal into its' groove, then put the axile and wheel assembly over the pedal and put your screws back into the mounting sections.
SOURCE: where to find free manual for kirby g3 vacuum and
Hi,
http://www.goodvac.com/articles.asp?id=135
Hope that helps,
Chris J.
GoVacuum
SOURCE: Kirby G3 made loud noise when running. Sprayed
No - the silicon is an insulating material and would have no effect on the electrics of the vacuum. Most likely you have a bad connection - dismantle the vacuum again and check the wiring and the motor with an ohmmeter. Be very attentive with the brushes, if they don't sit perfectly on the collector the motor will not run.
277 views
Usually answered in minutes!
×