I NEED THE CODE FOR MY UNIVERSAL RCA REMOTE CONTROL RCR312W

SOURCE: im using the rca rcr312w

1. These instructions come from the RCA website. The crucial step is to keep pressing the reverse button.
2. Turn on the component (the tv, dvd, etc).
3. Hold the TV (or DVD) button and the on/off button at the same time. It will stay lit.
4. Press the play button every five seconds until the component turns off.
   • Each time the Play button is pressed, the illuminated ON-OFF button blinks ten times and a block of 10 codes is sent to your component. This process continues until all the codes in the Code Lists have been searched. If the component has not turned off after all codes have been searched, the illuminated ON-OFF button blinks four times, turns off, and the Auto Code Search Entry method is exited.
5. When the component turns off, press and release the REVERSE button, then wait two seconds to see if the component turns on again.
6. If the component does not respond, continue to press the REVERSE button EVERY TWO SECONDS UNTIL THE COMPONENT TURNS ON again. This will isolate the correct code in the last block of codes sent. Each time the REVERSE button is pressed, the illuminated ON-OFF button blinks.
   • If the REVERSE button is accidentally pressed after the component responds, press and release the FORWARD button. Wait two seconds to see if the component turns off again.
7. To save the new code, press and release the STOP button.
8. The illuminated ON-OFF button turns off. You must press the STOP button to save the code.

SOURCE: Need a code for Hitachi Ultravision TV

hold power and tv button same time
until power buttton stays on then
slowly hit power button until tv turns off then hit stop button and tv will work with remote

SOURCE: program the RCA#rcr312 universal remote control

I have the book, but can't get mine to work, email me at [email protected] and I'll scan it and email it to you. I just can't figure mine out

Steve Allison

• 5569 Answers
• Posted on May 17, 2009

SOURCE: need codes for rca universal remote rcr312w. for apex tv

With your model number at hand, check the RCA website for a later code list. If you are the exception, you might find one.
Most all remotes have a 'search' function that lets you scan through all of the available code sets but this feature will, in most cases, provide only minimal functionality such as Power, Volume and Channel.
In truth, there isn't any such thing as a 'universal' remote, including the 'learning' remotes; I have one of those and it is unable to 'learn' from either of my later sets' remotes. At best, these should be called (honestly) 'multi-brand.'  

SOURCE: RCA Remote (RCR312W) Code for Sharp Television (19R-M100)

I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating