HP Laserjet 1022 orange light keeps flashing

HP LaserJet 1022 is a "host-based" printer so it must be connected to a PC. Load the driver on PC first and connect the USB cable when software tells you to do so.

Will not work on a Linksys print server.

LaserJet 1022N & LaserJet 1022NW have "special" HP print servers that can support HP host based printers.

Jan 2013 Installed this new printer driver and all my HP 1022 problems disappeared; now printing perfectly back as usual!
HP Printer Drivers v.2.13 for OS X
Click on the link above or copy and paste the following address into your Web browser to view the article:<http://support.apple.com/kb/DL907?viewlocale=en_US>

Hi,

Press the Go button until the green light starts flashing and the motor starts. The configuration page prints.

Go button is next to the Cancel Button ( X )

This seems to be a problem on these printers. I have five of them on my network and I had to use a generic driver to make them stop shutting off the print spooler on my print server. I use the LaserJet III driver which is a good HP generic driver. I found it to be best to uninstall all of the 1022 software and install the printer using the above driver that is part of the windows operation system therefore there is no need to download one.

on printer properties try to set on sharing tab check marks on : share this printer- render print jobs on client computers- list in the directory ..( all of this must be chacked).. on port tab see on what port is printer ..(tcp/ip - or virtual), on advance tab.. check alway available, spool print documents first., under security see if you have set group permission.. if you did not ,, add the computers to use this printer ( in most cases this is the problem).... if all of the above s set , and you can still not able to print .. enter in run...services.msc... find print spooler and restart it .. then try to print.

your printer have used for long time,it need to relax, buy new one(Im jocking). if you know how to apart your printer,see the relay separate paper on left-hand,change the small matriss pad (use doubled-face adsentive tape to stick them together).

there is something wrong in your cartridge may be its empty.. replaced a new one

I cleaned out the printer by removing any access toner. Made sure again no paper was stuck and then it worked.

HP LaserJet 1022 Printing Blank Pages

on the back side thers are two papers sensors inside the printer,they get stucked,normally they should come back