- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Service-mode functions NVRAM initialization An NVRAM initialization will return the following device settings to the factory-set defaults: All menu settings, including the fax header and company name Fax numbers and names that are associated with one-touch keys and speed-dial codes Additionally, all faxes stored in memory are cleared. 1. Turn off the product. 2. Press and hold both the down arrow button and the Cancel button, and then turn on the product. 3. Wait until the message Permanent storage init. appears, and then release the buttons. When the NVRAM initialization process finishes, the product control panel shows the Ready message. Super NVRAM initialization The super NVRAM initialization clears all settings affected by a regular NVRAM initialization, and also clears the product language and country/region settings. Both settings must be reset after a super NVRAM initialization. 1. Turn off the product. 2. Press and hold both the down arrow button and the Cancel button, and then turn on the product. 3. Wait until the message Permanent storage init. appears, and then release the buttons. When the process finishes, the product control panel shows the Ready message.
Please try this!! You may need a soft or hard reset. Here's some reading and instructions. Please use this first! resetting your scanner 1. Turn off your scanner, and then turn it on again.
2. Insert a pointed object into the reset hole on the back of the scanner. Then, gently press and release the reset button. Pressing reset does not clear the scanner's working memory or the V-Scanner folders.
If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!! Initializing your scanner clears all information stored in your scanner's working memory. Initialize your scanner only when you are sure it is not working properly. V-Scanner memory is not affected when you initialize the scanner.
1. Turn off the scanner, and turn it on again. First, the DSP boot version, and then Welcome To Digital Trunking appears.
2. Press 0. The following messages appear on the display: System Tests
Select Test Exits if no Key Press
3. Press 1. The following messages appear on the display: Factory Init Erase Memory ENTER if Yes CL to EXIT
4. Press ENT. The following messages appear on the display: Initializing Clr Main Mem V-Scan is OK Please Wait
5. Do not turn off your scanner until the initialization is complete. When the initialization is complete, M000 and Bank 0 Ch 00 appear on the display.
Sounds like the motherboard is corrupted. Please try these steps again. Thanks!! Happy Scanning!!
I need to ask you this. Normally one bank can't be closed. You may need a soft or hard reset. Here's some reading and instructions. Please use this first! resetting your scanner 1. Turn off your scanner, and then turn it on again.
2. Insert a pointed object into the reset hole on the back of the scanner. Then, gently press and release the reset button. Pressing reset does not clear the scanner's working memory or the V-Scanner folders.
If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!! Initializing your scanner clears all information stored in your scanner's working memory. Initialize your scanner only when you are sure it is not working properly. V-Scanner memory is not affected when you initialize the scanner.
1. Turn off the scanner, and turn it on again. First, the DSP boot version, and then Welcome To Digital Trunking appears.
2. Press 0. The following messages appear on the display: System Tests
Select Test Exits if no Key Press
3. Press 1. The following messages appear on the display: Factory Init Erase Memory ENTER if Yes CL to EXIT
4. Press ENT. The following messages appear on the display: Initializing Clr Main Mem V-Scan is OK Please Wait
5. Do not turn off your scanner until the initialization is complete. When the initialization is complete, M000 and Bank 0 Ch 00 appear on the display.
Please try this!! You may need a soft or hard reset. Here's some reading and instructions. Please use this first! resetting your scanner 1. Turn off your scanner, and then turn it on again.
2. Insert a pointed object into the reset hole on the back of the scanner. Then, gently press and release the reset button. Pressing reset does not clear the scanner's working memory or the V-Scanner folders.
If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!! Initializing your scanner clears all information stored in your scanner's working memory. Initialize your scanner only when you are sure it is not working properly. V-Scanner memory is not affected when you initialize the scanner.
1. Turn off the scanner, and turn it on again. First, the DSP boot version, and then Welcome To Digital Trunking appears.
2. Press 0. The following messages appear on the display: System Tests
Select Test Exits if no Key Press
3. Press 1. The following messages appear on the display: Factory Init Erase Memory ENTER if Yes CL to EXIT
4. Press ENT. The following messages appear on the display: Initializing Clr Main Mem V-Scan is OK Please Wait
5. Do not turn off your scanner until the initialization is complete. When the initialization is complete, M000 and Bank 0 Ch 00 appear on the display.
You may need a soft or hard reset. Here's some reading and instructions. Please use this first! resetting your scanner 1. Turn off your scanner, and then turn it on again.
2. Insert a pointed object into the reset hole on the back of the scanner. Then, gently press and release the reset button. Pressing reset does not clear the scanner's working memory or the V-Scanner folders.
If this doesn't work here's step two! CAUTION. THIS WILL ERASE EVERYTHING, but it MAY Fix the Problem!! Initializing your scanner clears all information stored in your scanner's working memory. Initialize your scanner only when you are sure it is not working properly. V-Scanner memory is not affected when you initialize the scanner.
1. Turn off the scanner, and turn it on again. First, the DSP boot version, and then Welcome To Digital Trunking appears.
2. Press 0. The following messages appear on the display: System Tests
Select Test Exits if no Key Press
3. Press 1. The following messages appear on the display: Factory Init Erase Memory ENTER if Yes CL to EXIT
4. Press ENT. The following messages appear on the display: Initializing Clr Main Mem V-Scan is OK Please Wait
5. Do not turn off your scanner until the initialization is complete. When the initialization is complete, M000 and Bank 0 Ch 00 appear on the display.
If not, from http://www.brother-usa.com , you can find your printer's support page and then e-mail support. Nothing involving the word "initiate" appears in the user manual; I looked.
Hi, I has this same problem but I found in the user manual this instructions and works ok: 1. Press and hold the Start key. 2. While holding down the Start key, push the RESET button on the bottom of the Organizer using a pen or some other pointed object. The following message will appear. "Do you really want to initialize the organizer's memory (this will delete all data)? Yes:[ENTER/No:[ESC] 3. Press to initialize the Organizer. The message .Working... Please wait.. appears while the Organizer proceeds with the initialization procedure. The Welcome message then appears.
Hi, I has this problem but I found in the user manual this instructions and works ok: 1. Press and hold the Start key. 2. While holding down the Start key, push the RESET button on the bottom of the Organizer using a pen or some other pointed object. The following message will appear. "Do you really want to initialize the organizer's memory (this will delete all data)? Yes:[ENTER/No:[ESC] 3. Press to initialize the Organizer. The message .Working... Please wait.. appears while the Organizer proceeds with the initialization procedure. The Welcome message then appears.
There is message iniailization
×