Hi, I just tried printing from the glass and now it is printing nothing. It was printing before when you asked me so this might be something you know. However, I don't get an error code. When I connect the fiery to another Docucolor 12, it works so I know it is the copier. Could this be the fuses? Thanks, Keith
The only fuses it could be are the 24v fuses going to the ROS. In general it would "normally" be the ROS and Halftone pwb or the Vsel pwb. Both of these might not be sitting right/loose ribbon cables etc, depending if you have been working in that area.
The other option is a defective cleaner clutch for the IBT. This "normally" leaves with just the black left on the print however. You will have to watch the machine and see if there is actually an image being produced on the drum. If not, the ROS (ROS and halftone pwb must always be replaced together)
143 views
Usually answered in minutes!
Thank you for your help. I found a loose connection on the Vsel pwb. By the way, what does ROS and pwb
stand for? I see it all the time, but never bother to know what it
stand for.
×