Hi can any1 help me.. wat is da problem of my copier afficio 450 wen i make a copy.. the copy is not good bcuz some area of txt is faded... or the copy is not equal...
It can lack
developer in the revealing unit it checks and it adds or it replaces.
If the image is good in parts, but light in others it is most often toner build up on the laser exposure glass which can be easily -but also VERY CAREFULLYremoved. If you lift the green handle for the toner bottle, you should see a narrow piece of glass protruding just underneath. You can grasp it with you fingers and slide it out for cleaning. Sometimes these have been removed (or broken) so they are not there. If the machine is also a printer, you should see much improvement (if this was the cause). If regular copying is still light in areas, then you may want to remove the copier glass - 2 screws on left scale, and 3 screws on rear scale (POWER OFF ON MACHINE), remove glass and clean with glass cleaner, then slide scanner to the left and clean the mirrors.
Hope this helps.
172 views
Usually answered in minutes!
Usually when that happens, it means you need developer for your copier. What is the copy count?
×