Computer headset problems

i have cyber acoustics headset and i cant hear anything but my Mic works, my sound is all fine, when i plug my headset out i can hear but when its plugged in, i cant hear anything.

u have to set it up from the computer....go to control panel and audio configure and itll show the rest that would be easy for u to follow....

It is your sound driver related problems.
Check in device manager there is Yello exclamation mark with drivers uninstall your sound drivers and install again perfact driver for your sound chip.

Thanks for using fixya.
Please rate solution if it helps.

You should take your headset to another computer/location and see if your problem still exists.
That way you can eliminate problems with either your computer hardware or your outgoing internet connection (jitter).
I don't think that the CD will be necessary, since it is a USB device, which contains it's own little sound card and doesn't need any drivers.
If the problem persists and it turns out to be a problem with the headset, I would definitely return/exchange it.

just push the button on the left for a while

may be u should try to change the headset status to looset status and again to headset. It may solve ur problem.
For it, open the settings, open the enhancements.
In it, there is a menu called Enhancement in use. In it, change headset to loopset or text phone. Restart the phone. And in the same option, change it to headset later !!!
I think ur problem can be solved by this.
==================================================
If it works, dont forget to send me a feedback.
I am hoping for it . If any problem rises, just ask me.
I will be there.
Sajan([email protected] / [email protected])

You just have to press your blutooth on/off button a bit longer for 15 to 20 sec, when the LED blinking stops (noted that the LED should be turn ON but not blinking), try to search the device again with your phone. By that time your blutooth headset should be recognized by your phone, then select and enter the code 0000.

maybe its a problem with your sound card. Check your microphone settings in Windows.

It may be that this person is "messing around" with you, or their speakers are rigged, from my experince, it sounds like your headset is perfectly fine, or your headset microphone switch was toggled on "Off" Msn is just a instant messaging chat, shouldn't have anything to do with your headset.

just after turn on both's blutooth. turn on blutooth search of headset also by pressing vol key for 3 sec.. then the blue light will turn on for few sec .. make search on mobile for blutooth device and u will pair it...