Wron catridge My printer is saying wrong catridge and not printing for some reason this has never happend before and I am using t he same catridge for 15 months!!!

How many time do you refiled the cartridge?
Are you change by new one or refile when cartridge get empty.
Replace with a new one.

Try to reseat the print head:
Reseating the print head is seldomly needed to be done.

1. Press the Open Button (1) to open the Paper Output Tray (2).
   
   
   
   
2. Raise the Scanning Unit until it stops.
   
   
1. Pull and hold the Scanning Unit Lever towards you, then raise the Scanning Unit.
   
2. The Print Head Holder moves to the middle.
   
   
   
   
3. Open the Inner Cover 1.
   
   
   
   
4. Open the Inner Cover 2.
   
   
   
   CAUTION:
   
   a. Do not try to manually move or stop the Print Head Holder.
   
   b. Do not touch any metal parts.
   
   
5. Press the ink tank's tab (1), then remove it from the slot (2).
   
   
   IMPORTANT:
   Handle ink tanks carefully to avoid staining clothing or the surrounding area.
   
   
6. Lift up the lock lever and take out wron catridge - mp780_ph_removed.gif>
   
   
   
7. Again, place the print head back in position wron catridge - mp780_ph_inserted.gifck lever.
   
   
   
   
8. Insert the ink tank into the empty slot on the print head. Press down gently on the ink tank until an audible click is heard. Makewron catridge - mp780_inktankclicked.gifn the correct slot.
   
   
   
   IMPORTANT:
   
   a. Make sure that the ink tank is inserted in the slot that corresponds to the ink tank's color.
   
   b. If the ink tank is inserted in the wrong slot, perform two head refreshings.
   
   
9. Close the Inner Cover 2.
   
   
10. Close the Inner Cover 1.
    
    
11. Pull the Scanning Unit Lever towards you to close the Scanning Unit.
    
    
12. Align the print head position after the print head is installed. You can align the print head position either automatically or manually. When automatic alignment does not work well, align the print head position manually.
    
    

1. Load A4-or letter-size plain paper in the paper support tray. Auto alignment cannot be performed when the Feed Switch is set to [CASSETTE].
   
   
2. Press <Menu> repeatedly until [MAINTENANCE] appears.
   
   
3. Press left or right arrow to select [AUTO HEAD ALIGN].
   
   
4. Press <OK>. The print head position alignment pattern prints.
   
   
5. Check the printed pattern. If the printed pattern matches the illustration, the print head position alignment is complete.
   
   

1. Load A4- or letter-size plain paper in the paper support or cassette.
   
   
2. Select the paper source with <Feed Switch> button.
   
   
3. Press <Menu> repeatedly until [MAINTENANCE] appears.
   
   
4. Use left or right arrow to select [ALIGN PRINT HEAD].
   
   
5. Press <OK>. A horizontal pattern is printed.
   
   
6. Beginning from column A on the printout, ewron catridge - mp780_alignment1.gifhe patterns that have the most solid image.
   
   
   
   (1): Bad example (Least solid box)
   
   (2): Good example (Most solid box)
   
   
7. Press left or right arrow to select the pattern number that you checked in column A on the printout in step 6.
   
   (A): Column
   (0): Select pattern number with most solid image
   
   
8. Press <OK>.
   
   
9. Repeat steps 7 and 8 to adjust columns B to L. When all the horizontal patterns are adjusted, you will be prompted to print a vertical pattern [PRINT VERT. PATTERN].
   
   
10. Press left arrow. A vertical pattern is printed.
    
    
11. Beginning from column M onwron catridge - mp780_alignment2.gif checkmarks in the patterns that have the most solid image.
    
    
    
    (1): Bad example (Least solid box)
    
    (2): Good example (Most solid box)
    
    
12. Press left or right arrow to select the pattern number that you checked in column M on the printout in step 11.
    
    
13. Press <OK>.
    
    
14. Repeat steps 12 and 13 to adjust column N.