My kipor KGE 6000 Ti generator overload light is on, and there is no current output

When you load a generator it should increase in speed to compensate for the voltage drop, is it increasing in speed?

Reasons for excitation. There's not enough remanence.

If you need to have new diesel generator set in futurer, please contact company email [email protected] directly who can supply Cummins, Volvo, Perkins, Yuchai, Shangchai diesel generator etc.

Check for short circuit or wrong wiring

Oh, there are many people say the generator can not supply power. Maybe the fuel is not enough or other problems. I recommend you to buy diesel generator set in future, its quality is better and can use for a long time. A website for your reference: www.dieselgeneratortech.com

Oh, there are many people say the generator can not supply power. Maybe the fuel is not enough or other problems. I recommend you to buy diesel generator set in future, its quality is better and can use for a long time. A website for your reference: www.dieselgeneratortech.com

Read the instruction manual. If you are certain you did everything right and the generator does not behave as intended then return it to the supplier as faulty.

most warning and alarm's are set less than what the manufacture rating is. it's a safety feature without it we would overload all our stuff

http://www.kiporpowerequipment.com/wp-content/uploads/2015/06/IG6000H-Owners-Manual.pdf click on this link for your equips manual PDF

You may be UNDERLOADING the generator and it may be unstable with such a light load... see if it might behave running a heavier load... put a 100 watt light on it as a test,