I noticed last night that the clock was not showing on my DVD/VCR. I tried the remote and nothing happened. I pushed the power button on the front and nothing happens. I unplugged it and tried another outlet and still no power. Is it time to trash it or is it a simple fix? Thanks Shirley
SOURCE: Panasonic DMR ES30V DVD Recorder/VCR
take it to a tech to check the system control chip could be bad.good luck
SOURCE: Panasonic DMR-ES45V - DVD recorder / VCR combo Remote not workin
My remote is not working. When I press a button, I get the following message on my unit: U12, U30, SET #, CHK REMOTE #, or RC #. What can I do to fix this? The message displayed means that the remote control and unit are not communicating and the remote needs to be programmed. To program the remote, press and hold the same number that is displaying on the unit and the [ENTER] or [OK] button for more than 2 seconds. For example, if the unit displays “SET 2”, press and hold [2] and [ENTER] or [OK] for more than 2 seconds.
1,854 views
Usually answered in minutes!
×