Question about Delta Garden

1 Answer

Sprayer pump on a 32oz spray bottle stoped working

The sprayer will not pump liquid out of the bottle, it only worked for a few weeks and no longer workers.I've had the same problem on other bottles of the same brand and had to replace the whole unit. I would like to repair the sprayer pumps that i have thanks!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 7 Answers

Seals, did you fill it recently and drop the o ring or seal?
Check and clean all o ring or seal under filler cap.

Posted on Nov 20, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1407 Answers

SOURCE: How to Install the Pump Guard into Electric Powerwasher

Here is the web page on how to install the pump guard. The bottle is installed on the water inlet side of the pump. Good Luck, enjoy
http://www.karcherresidential.com/support/downloads/pdfs/pic_guide/karcher_pmpgrd_elec_pg.pdf

Posted on Dec 12, 2008

  • 1244 Answers

SOURCE: Peugeot 407 not 405 blocked windscreen washer

its in the pump it self mate ya have to take the pummp out of the bottle

Posted on Jan 17, 2010

  • 3 Answers

SOURCE: Moen liquid dispesner no longer works

WELL SUCKS FOR U you little *******!

Posted on Jan 28, 2010

  • 19 Answers

SOURCE: NEED REPLACEMENT PLASTIC BOTTLE WHICH FITS ON

Contact Moen, at buymoen.com and or on their 800 number, tell them that you have a cracked bottle for that model number. They will send you a new one with no cost to you. If they don't have that model available any more, they will/should upgrade you to a new one. Moen is great about this kind of stuff. They have a lifetime warranty on their products. Good luck.

Posted on Aug 18, 2010

heatman101
  • 43501 Answers

SOURCE: my bissell deep clean carpet shampoo machine does not spray,

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101

yfggf

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my windshield sprayers to spray any liquid.


pump may work, wiper motor may not. check wiper switch and fuses

Jan 26, 2016 | 2006 Kia Sorento

2 Answers

Volvo c70 windshield sprayer not working


Try disconnecting the tubes from the spray head (under the hood). The press spray button, if nothing comes out, you have a bad pump. It liquid is pumped, then you need to clean or replace the spray heads - they are clogged or damaged

Sep 04, 2014 | 2009 Volvo C70

1 Answer

Roundup Sprayer


Hi Robert
Your pump probably needs priming.
Hold the triggger down and squeeze the bottle at the same time to create a pressure inside of the bottle of spray to prime the pump.
Bud

Apr 27, 2013 | Roundup Garden

1 Answer

Wagner 404 Plus Airless motor stops.


All airless sprayers are on-demand pumps. The two settings are prime and spray. When it is set to prime, the pump will draw liquid from the bucket below and pump it out the side tube and will never stop until you switch it back to spray. When set to spray, the pump will run until the pre-set pressure is reached, then stop. As soon as you start spraying, the pump will run until a few seconds after you stop spraying. Tip size and pressure setting will affect how long after you stop spraying the pump will run. A large tip and high pressure will cause the pump to run longer after you stop spraying.

Sep 02, 2017 | Wagner Air Tools & Compressors

1 Answer

The liquafeed did not dispense much during about 10 minutes of spraying, (Only about 1/4"of Liquafeed was dispensed.


I'm sorry to hear about the problems you are having with your LiquaFeed Sprayer. Your water pressure needs to be at least 45 PSI. If your garden hose is longer than 50 ft, this can lessen the water pressure. If there is any foreign matter or crystalization on the bottle or the sprayer where the bottle inserts, this will need to be soaked in warm water, as it may be clogging the sprayer. With the bottle of LiquaFeed apart from the sprayer, squeeze the bottle to see if any product comes out. If none of these troubleshooting steps help, please call us at 877-465-5160, and we will be happy to assist you further.
Hilary @Miracle-Gro

Sep 19, 2011 | Scotts Miracle Gro Liquafeed Sprayer 6...

2 Answers

Have a swarm of bee's living under a bird cage. Have been there for around 5 to 6 weeks.Would like some advise on how to remove them.


A few soapy mix in spray bottle sprayed on flying things like bees and wasps will cause them to drop like flies. Obviously be careful that others don't sneak up on you and that they're not africanized bees! This is for when they haven' t made a complete hive yet and there isn't a lot of them.

Cover yourself as much as possible, ie long clothing, gloves, hat, scarf etc.that is light (ie white) in color. Don't look like a flower. Then use a sprayer of some sort, bottle with longer reach or garden hose with spay applicator etc. Spray them then get out of there quickly. :) The soap will prevent their flying so they can't get food or water. You may have to do this more than once until none are around anymore.

Do NOT do this if you're allergic to bees! Call a beekeeper.

Jun 05, 2011 | Computers & Internet

1 Answer

Good fues and new washer pump. still not pumping fluid. Not frozen either. Wipers and controls seem to still work at trun signal arm??


The little pipes that spray the windshield washer fluid clog very easily. Use either a very thin piece of wire or a very small drill bit (a welder's "tip cleaner" works perfect!) to clean out the sprayers. Use only 100% bottled washer fluid and not tap water since the minerals will clog up the sprayers.

Make sure the rubber hoses between the pump and the sprayers did not pop off or split. If your fluid level goes down but you get no spray it is going somewhere it is not supposed to.

When you activate your windshield washers, you should be able to hear that little pump run- it makes a very distinctive sound. If you do not hear it, there is a wiring problem.

Feb 10, 2011 | 2004 Ford Expedition

1 Answer

Sprayer not working


Try these suggestions to get your machine working properly:

Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:

- Remove the belt access door and inspect the pump belt to ensure it is not broken, worn or stretched. You may also check the belt by turning on the power and watching the brush on the bottom of the machine. If the brush rotates the belt is not broken.
- Check for proper placement of the o-ring on the SmartMix Cap Insert (some o-rings are detachable and need to fit over the straw; others are molded to the cap).
- Check for liquid in the base of the machine where the SmartMix Bottle sits (SmartMix Reservoir). If there is no liquid in the reservoir, the neck on the SmartMix Bottle may be undersized, the cap will not make proper contact with the unit and the smart mix bottle will need to be replaced.
- Check for the black or red tank gasket on the SmartMix Bottle Cap and on the bottom of the Tank-in-Tank Assembly. If gasket is lodged in base of unit or has been lost, reattach gasket on auto-load or order new gasket if appropriate.
- Check the valves on the bottoms of the Tank-in-Tank and SmartMix Bottle to make sure water/solution will come through when the "x" valve is depressed. Bladder or SmartMix bottle may be empty or the valve may be blocked internally.
- Check if the small rounded window tabs on the top edge of the Floor Nozzle Window are locked in their mating slots on the base of the machine and not inadvertently lifting the tank up out of place.

If these suggestions do not solve the problem, contact a technician at a local BISSELL Authorized Service Center inspect your machine.
To locate your nearest BISSELL Authorized Service Center, please go to www.bissell.com. Click on the Customer Support tab near the top of the homepage and enter your zip code in the Service Center locator box to perform your search.

You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1.

Jun 15, 2010 | Bissell 7920 ProHeat Pro-Tech Upright...

2 Answers

Wiper sprayer does not spray


clogged sprayer buy new ones.

Oct 05, 2009 | BMW 325 Cars & Trucks

Not finding what you are looking for?
Garden Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delta Garden Experts

John Trevino

Level 3 Expert

1407 Answers

Jimmy Myles
Jimmy Myles

Level 2 Expert

218 Answers

Kardoc

Level 3 Expert

5419 Answers

Are you a Delta Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...