Question about DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder

1 Answer

How do i set up my wr7 remote with DIsh VIP722 DVR?

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 184 Answers

I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at kimberly.escobar@dish.com.

You can lookup codes if needed here: http://www.mydish.com/support/apps/remot...

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.
Kimberly. Escobar
Social Media Representative
DISH L.L.C

Posted on Jun 27, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: DISH DVR doesn't respond to remote

  1. If this is a TV2 location take the remote to the location of the DVR.
  2. Open the door on the right side of your receiver.
  3. Press SYS INFO.
  4. Press Record multiple times on your remote.
  5. Exit the screen and see if the remote works, if not replace the batteries and repeat steps 1-4
  6. If the remote still doesnt work, and this is a tv2 location (no receiver in the room with the tv) check the antenna on the back of your receiver, make sure that it is connected tightly and standing straight up.
  7. If none of this works call Dish and ask for a new remote.

Posted on Jan 31, 2010

SOURCE: Dish DVR remote control programming Bose Cinemate

your screwed. jk idk

Posted on Apr 12, 2008

  • 374 Answers

SOURCE: Dish network dvr vip722 freezes

I am sorry to hear of your issue and I wish I was able to bear better news but I am afraid that once there is an issue with the internal hard drive there is no way to retrieve the information off of it using common methods such as using on screen prompts or at least that is what technical support has stated.I am sure you already know that Dish charges a one time fee of 39.99 to make the expansion USB port active so that what you are asking is possible. If you have not paid the 39.99 yet I would call customer service to see that if you do so and the receiver is downgraded to a non dvr unit would they transfer that fee. I expect they would not and my suggesting that is that on a non dvr unit I know you can access the information on the hard drive if the receiver is malfunctioning. I know you are probably very frustrated to say the least right now but if you are interested is discovering other possible set up configurations Dish offers a Sling box which is integrated with your internet connection and is very fascinating with the possibilities it provides. Thanks for using Fix Ya and if I can be of further assistance please let me know.

Posted on Mar 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vip722 dvr bad power supply


Hey andrewsgmc,

The Power Supplies in our receivers are unable to be replaced. We would have to send out a replacement receiver to get this taken care of. You can reach me at thomas.faust@dish.com if you would like any assistance with this!

Tommy Faust
DISH Social Media Representative

Mar 14, 2012 | DISH Network ViP722 DTV Receiver /...

1 Answer

I have a kameleon 15-2133 remote control, I need a code for dish network vip722 dvr.


Hi my name is Mike Houston of DISH Network and with trying programminga Universal Remote to our DISH Network receivers there are codes that thoseremotes go by. I will send you a link to that remote; http://support.radioshack.com/support_video/doc70/70182.pdf

Sep 15, 2011 | One For All Kameleon URC6690 LCD Remote...

1 Answer

I have just purchased an avex universal urc-r6 remote and i cannot seem to find the way to program it for my vip 722 dvr receiver.


Hi tesmathwi572 my name is Mike Houston of DISH Network andI was going over your post and with our DISH remotes that go with the receiverwill give full functionality to change the channels as well as the DVR andaccess the Menu. Buy getting another remote from a store may not program to thereceiver to change the channels, if I can check your account information suchas account number or phone number so I can see about getting the remote thatgoes with that system. I will leave you my e-mail so you can contact medirectly. michael.houston@dishnetwork.com

Feb 23, 2011 | DISH Network ViP722 DTV Receiver /...

1 Answer

I have an rf20 universal remote. all components are dialed in and working except for my dish network 722 dual hd dvr receiver. I am following the owners manual instructions and when I enter the codes...


Hi jford2023, my name is Mike Houston of DISH Network and I was readingover your post about the Universal Remote Control not working the VIP722 DualDVR receiver. To have full functionality for our receiver the best thing is touse one of our remotes; I will send a link to help with the setting up of theUniversal Remote Control RF20 LCD, http://www.universalremote.com/products/retail/remotes/urc-rf20.

Jan 16, 2011 | Universal Remote Control RF20 LCD Remote...

1 Answer

I have a DISH Network ViP722 DTV Receiver / 350-Hours Video.... Whenever I have my brightness setting below 40 on my LG TV, my Dish DVR will no longer respond to its Dish issued remote control. If I turn...


Hello! Daniel Busa with Dish Network. That would be a case of remote interference. You'll need a model 6.3 or 6.4 remote. You can set it to a uhf frequency instead of an ir that will correct the issue.

Aug 26, 2010 | DISH Network ViP722 DTV Receiver /...

1 Answer

I have an LG 42LG70 42 in. HDTV LCD TV. Whenever I have my brightness setting below 40, my Dish DVR will no longer respond to its Dish issued remote control. If I turn the brightness anywhere above 40,...


Tries unplug,replug the DVR box an hour later.The box should reset itself and update it software.The box should work normal again.Not,call Dish Network to replaced the box,have intermittent problems.

Aug 26, 2010 | DISH Network ViP722 DTV Receiver /...

1 Answer

I need a code for my 6690 URC LCD remote for my vip722 dvr dish network box


codes and manual here:http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=oneforall&dv=universalremote&kw=&st=&ar=&dt=&so=&au=&le=&pg=4

Mar 15, 2010 | One For All URC-6690 LCD Remote Control

2 Answers

Program sony remote to operate dish vip722


The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

Sep 08, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

1 Answer

Connect AV receiver to a Dish receiver model VIP722 DVR


Your DVD player should connect to your TV, not the DISH DVR. Is the Yamaha some sort of receiver or something similar? If so, it should plug into the TV as well. The DVR just provides a signal to your TV, just like the other two components. On the back of your TV there should be other connections to plug into like HDMI1, HDMI2, AUX1, etc. You select which input you want to view using your TV remote. For example, if you were watching a DVD, you turn on the DVD player. Say it was plugged into AV1 or something similar on the back of the TV. With your TV remote, select which input you are using...that way your TV receives the signal from your DVD player and nothing else.

Nov 16, 2017 | Onkyo HTR500 Receiver

2 Answers

Need Dish DVR ViP722 remote code.


If you are looking to have the Dish remote operate your TV, just do a random search for your tv. First, hold down the tv button on the dish remote until all the rest of the light up. Next press the tvpower button on the dish remote. Next, press the channel up button (this is the up arrow button) until the set turns off. When it does turn off, press the # key at the bottom right of the remote. The tv button will light and flash twice. That's it. Your done. Hope this helps.

Feb 20, 2009 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV

Not finding what you are looking for?
DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

matt martin
matt martin

Level 3 Expert

1255 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...