How to reset ur router password - NetGear RangeMax NEXT WNR834B Wireless Router

If u dont know ur router login password then reset it but keep in mind it would reset to default.
And if u lost ur wep or wpa2psk password then just login from a computer or directly via web to ur router 192.168.0.1

reset you router, put the default id and password, the address to put in your bowser is http://tplinklogin.net/

If u forgot the password reset the modem/router....usually the reset button will be at the bottom or rear of ur modem/router and after reset ur default username password will be admin / admin or admin / password

just reset ur router..
backward there is a needle size hole in router just nudge a needle in it n press it for 5 sec, ur password nd settings will be reset to default settings n password..!

Dear sir,

log in to ur router & use tools, or setting then user management or security u can change ur password

If u dont remember ur router passord u can use the Reset button.

switch off ur router press and hold the reset button for 15 seconds.

Then turn on ur router

well if you forgot the username and password then reset the router for 20-30 secs pushing the reset button. powercycle the router for 10 secs. then open the router page>
-- http://192.168.1.1 or http://www.routerlogin.com or http://10.0.0.1
-- username and password is " admin" and "password"
-- Left side click on Setup Wizard
-- Apply basic settings
-- go to wireless settings
-- change ur wireless settings according to ur need
-- and apply all the settings.
and try to connect all the wireless computers

reset ur router... there would be a reset button at the back, reconfigure your router and have a new password set. this will solve ur problem

yea simple solution is reset your router on the router there should be a reset button push that hold for about 30 seconds when ur done since its a linksys go to your browser like internet explorer and type in this 192.168.1.1 thats usually the default gateway for linksys routers password is usually something like username: admin or administrator and password is usually:password and the GUI should come up and just reapply a password you can remmber =] and while ur at it secure ur network so others dont come in =]

1. hard reset ur modem ( it will set to bridge by default)
2. connect ur modem to WAN port at netgear router
3. connect ur pc to LAN port at netgear router
4. by default ur pc ip should be 192.168.1.x
5. type at IE/firefox address bar


username = admin
password = password

6. enter all basic info (ISP = other, streamyx username password, wifi setting)
7. set value for idle timeout (in minutes) = 0