FOR HP 5610 All in One error 0xd05d010d Reset power.

This page explains how to troubleshoot that error.

Ink System Failure or 0x or C2 Error Message Displays on the Front Panel

Try to reset the printer:

Unplug the printer from power

Hold the # and 9 together while plugging it back

If still not working try again with a # and 3 combination

Try to reset the printer:

Unplug the printer from power

Hold the # and 9 together while plugging it back

If still not working try again with a # and 3 combination

SOLUCION: Hola la solucion para la HP Officejet 5610 con ERROR 0xd05d010d es muy sencilla hay que resetear el Equipo lo cual se hace asi:

1. Desconectas el cable que va de la impresora al equipo
2. Luego desconectas el cable de poder de la impresora
3. Mantienes presionadas las teclas (ASTERISCO) * y (NUMERO) # y conectas el cable de poder a la vez.
4. Te sale unas preguntas de Idioma y pais las respondes y LISTO

BUENA SUERTE

lets start uninstalling your hp oj 5610 software from the uninstall program to remove it properly. Second is to install the software again... if the problem occurs the best thing to do is to go to the nearest HP Service Center in your area... i hope it helped.

Reset the product:

1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....


http://www.hp.com/printer/prob676ijt65/solution

djiu9ofdfd16

Unplug the power cord from the All-In-One as well as the power outlet.
Plug the power cord directly to a wall outlet without surg protector. (if possible connect it to a different power outlet)
Before connecting the power cord to the All-In-One press and hold the # and no 6 button and then insert the power cord, do not release the keys until you see a message a reset (if the screen goes blank then release the keys and turn the power on)
Then check and see

Good Luck

UNPLUG PRINTER FROM WALL SOCKET PRESS # AND 9 AS YOU PLUG PRINTER BACK IN TO DO A FULL RESET