At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Display I tried to turn on our oven tonight and the display started to flash and click. The display showed the time and Pre. The oven never would come on. I turned off the circuit for an hour and this did not help. We did lose power and I reset the clock which cleared the PF but still the oven would not turn on. It just keeps flashing and clicking when I try to preheat it.
I hate to sound like an idiot, but I cannot find a part number for an electronic module. Can you guide me in the right direction or a prt number? Is that the control panel? Thank you for your help!I hate to sound like an idiot, but I cannot find a part number for an electronic module. Can you guide me in the right direction or a prt number? Is that the control panel? Thank you for your help!
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Set the oven to the required temperature. 2. Press the g button. 3. Set the total cooking time with the + button (see the example in the illustration right, showing 1 hour and 30 minutes). 4. Press the h button. 5. Set the cooking finish time with the + button (the example in the illustration shows 12.30 hrs.). After setting the display shows the time of day and indicates »AUTO«. ❑ The oven cooling fan will start immediatley. ❑ At the pre-set time, the oven will be automatically switched ON. ❑ The settings can be corrected at any time. ❑ When the pre-set cooking finish time is reached, a signal sounds and the oven is automatically switched OFF. To turn the signal off, briefly press the h button. 6. Turn the oven selector switch to the 0 position. 7. The »AUTO« symbol blinks. Important: It must be switched OFF by pressing the E button.
I found I have this exact problem. Same bake preheat issue: I can bake if I set broil first. However, the oven doesn't work if I press bake first. The control board has already been replaced a couple times over the years. Is this another replacement??
check incoming electric first, pull it out and gain access to main wire terminal, With multimeter set to at least 250v AC , check your power across the wiring as such. black to white (110v), red to white(110v) and then black to red 230v. if that ok ok turn, then start ckin elements for continuty also there might be a thermostat( usually an 1 in. round component with 2 wires located right inbetween the elements that has gone bad, will show no continuity. ck that before electronic control the fact that its clickin sounds like the relays are workin properly
This just happened to me. I have whirlpool double oven accubake. The display went blank and i had to turn the breaker off. I left it off for several hours. When I turned the breaker back on my oven display read "Loc" in big letters to the right of the time. I held the start button down for 5 secs. The display went away and the oven started to work as if nothing had happened. I hope that is stays that way.
The control is automatically set to turn off the oven after 12 hours baking or 3 hours broiling should you forget and leave the oven on. If you want to remvoe this feature do the following steps:
1. Press and hold, at the same time, the BAKE and BROIL buttons for 3 seconds, until the display shows "SF".
2. Press the DELAY START TIME button. The display shows "12Shdn" for 12 hour shut off.
Press the DELAY START TIME button again. The display will show "no Shdn" for no shut off.
3. Press the START button.
I hate to sound like an idiot, but I cannot find a part number for an electronic module. Can you guide me in the right direction or a prt number? Is that the control panel? Thank you for your help!
×