I need a replacement seat for a Ascend FS10....any ideas of where I can find one?

Repairs are done using a hot poly material. No adhesives will stick to poly-plastic for very long. Check with manufacturer for the plastic material to be melted into the repaired area. Like hot glue

called a 'kayak-seat' they are available online for about $100-$150 for a good one.

You might want to check the steps provided here for your idea on how to do it using other phones.
http://forums.androidcentral.com/huawei-ascend-p6/332276-huawei-ascend-p6-cant-connect-my-wi-fi-network.html

You need to reset the firmware. Look for your phone's manual online for instructions on how to do this.

Press Menu / Set button.

Choose the Settings Menu (Wrench Icon)

From there you should find the Lanugage Menu.

Hello info,

You can go to this link:

Lumix FS10

And then put a check mark on I accept and then click view.

You can rate my answer if you appreciate it.

Thanks!

-damneddle

You can download the manual and more from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/camcorders/flash_memory_camcorders/fs10#BrochuresAndManuals


http://www.usa.canon.com/cusa/support/
consumer/camcorders/flash_memory_camcorders/
fs10#BrochuresAndManuals

Canon does not support basic software to actually download your video back to your PC. It is propritary software, and it is not available from the Canon poorly run web site. i.e. It is completely worthless by itself

Try this link, and choose your operating system. Hope it helps. http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=2547&modelid=16184

You should have 110 volt wall plug with fs10. it plugs in to the camera. open the view window it is a small port on the side of the fs10.