Sanyo model dp42848
Thats usually caused by the Inverter boards. You can get a replacement inverter from www.tvrepairworld.com
SOURCE: My 32in sanyo LCD tv stop showing picture after i
Sanyo is cheaply made TV, but then again, most LCD TV last about 2~3 years before breaking down.
You need to check out the power supply and the inverter board.
Please see my basic troubleshooting guide:
http://s807.photobucket.com/home/budm/allalbums
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: try www.shopjimmy.com or Ebay
SOURCE: Sanyo dp42848 turns on, picture comes on then goes
Sounds like a loose connection to the display panel. Did you physicaly move it from the time it didnt work to the time it started working..
SOURCE: sanyo model DP42848 pic comes
Mine has been donig the same thing.
If the TV is left on a screenshot of some sort, it makes a loud beeping noise and then shuts itself off.
Not sure what to do.
SOURCE: I have a sanyo LCD
Liquid Crystal Display (LCD) screens have a light behind the display that shines through the screen so that you can see the picture. If you can see picture dimly on the half that is not backlit, it sounds like half of the backlight is not working. For this you will need tecnical assistance. H
SOURCE: My Sanyo DP42848 has audio but no picture. How
i turn my sanyo on and its all good for a few seconds then i loose picture but still have sound ,,whats wrong?
1,561 views
Usually answered in minutes!
×