Mitsai dvd remote control code - Universal Remote Control URC-200 LCD Remote Control

Try replacing the loading belt.

Remote Control Codes For Sharp TVs

DirecTutor.com https://www.directutor.com > content > remote-control...
The 4 digit codes for most programmable universal remote controls for Sharp televisions are: 0039; 0093; 0165; 0386; 1004; 1009; 1011; 1025; 1064; 1077; 1078 ...
You've visited this page 2 times. Last visit: 13/02/23

• 
  

  SHARP DVD Player Remote Control Codes

  https://www.directutor.com > content > sharp-dvd-pla...
  Program your universal remote control to a Sharp DVD player. Use the following 4 and 5 digit remote codes. Sharp DVD Player 4 Digit Remote Control Codes:
  
  ..

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Sylvania DVD Player Remote Control Codes

codesforuniversalremotes.com https://codesforuniversalremotes.com > sylvania-dvd-p...
Program your universal remote control to a Sylvania DVD player. Use the following remote codes. Sylvania DVD Player 4 Digit Remote Control Codes: 2213 2260 2321

Sylvania DVD Player Universal Remote Codes

universalremote.codes https://universalremote.codes > sylvania-dvd
Feb 14, 2021 - First of all "Turn The Device On" · Now press and hold the "Setup" button · Enter the "9-9-1" (three digit) code · Now hold down the "Power Button" ...

Sylvania DVD Player Remote Control Codes

directutor.com https://www.directutor.com > content > sylvania-dvd-p...
Sylvania DVD Player Remote Control Codes ... GE Universal Remote Codes with Program Instructions. sameeha ... Smart TV Universal Remote Codes By TV Brand.

..

Joseph, is this the remote that came with the player, if not you will have to program it. code links below.
press the helpful button and follow me on fixya

Remote Control Programming Codes DVD
Find Remote Codes
3 Digit Universal Remote Codes For DVD Codes For Universal Remotes
4 digit DVD and DVD Recorders GE universal remote control codes

http://remotecodelist.com/remotes/magnavox/magnavox.htm lists the code for your device as possibly being 1000, 1001, 1002, 1003, 1004, or 1005. Of course, you also have the option of using the remote controller's "Code Search" button. With Codes:
Turn on the DVD/VCR unit directly. Continue to depress the remote controller's "Code Search" button for about ten seconds, release, & the light on the remote controller should stay on. Enter the four-digit code (1000, 1001, 1002, 1003, 1004, or 1005) for the DVD/VCR unit. The remote controller's light should go off. Press the remote controller's power button, & when the DVD/VCR unit turns off, then you will know that the remote controller has been correctly programmed.

Without Codes:

With the DVD/VCR unit on, continue to depress the remote controller's "Code Search" button for about ten seconds, release, & the light on the remote controller should stay on. Continue to tap the remote controller's UP or DOWN channel button ONLY UNTIL the DVD/VCR unit responds. Then, press the power button on the remote controller once the channel has changed. If the DVD/VCR unit shuts off, then press the power button again to turn it back on. If the DVD/VCR unit turns on, then the remote controller has been correctly programmed. Otherwise, repeat this whole process until the remote controller is correctly programmed.

I can help you with your Coby DVD & DirecTV remote control.

This is a list of all the Coby DVD control codes for DIrecTV remote controls:

20778, 20852, 21086, 21107, 21165, 21177, & 21351.

Complete instructions on entering DirecTV remote control codes are here.

I hope that helps.
_________________________________________
DirecTV Remote Control Code List Download
DirecTV Remote Control Manual Download
DirecTV Remote Control Code Entry
DirecTV Remote Control Code Search
DirecTV Remote Control Onscreen Setup

I translated the appropriate page into English.

I recommend using the auto-search function to find the code for your Memorex DVD player.

To program your URC-3021 remote control to operate your TV, the remote has a code search function.

To search for a code for your DVD:

1. On the remote control, press DVD once.
2. Press and hold SET until the LED blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the the DVD and slowly alternate between pressing POWER and DVD. Stop when the DVD turns off.
5. To lock in the code, press and hold SET until the LED blinks twice, then release SET.

Hope that helps.