At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: The msg area on the control panel does not light up
Are you still able to print/scan/copy? If so, the LCD could be defective. Try to unplug the power of the printer for about 30 seconds then plug it back in.
If it doesn't help, them the LCD could be defective.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Can you please check for any jammed buttons on the remote and/or control panel? Try switching on the TV manually, while removing the batteries from the remote. If you notice same problem, the area to be looked into is around the system control area: like dry solder, leaky/dry capacitors and this should be done only by a qualified service technician.
Check the settings - if the internal speaker is turned off, for example, and you try to raise or lower the volume, you'll get that message. I would restore the factory defaults and see what happens. If you still get that msg after that, you have a more serious issue.
Here is the knowledge base information. http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=6273
If you check all these, and still getting the error, you'll need to get the drain motor replaced. This is not a simple task, as the entire front of the unit must be removed to access the drain pump area.
Top must come off, control panel detached, door gasket outer ring needs to be removed, door lock also much be unplugged. The front panel of the unit also needs to be removed as well.
When you open any web site so open web site minis Internet is working fine so go to the control panel and open add /remove program and remove the yahoo msg and downlod new yahoo msg from yahoo website and install after login user I'd and password then working ...ok Any problem fell free contact
d problem is in a transistor costing little, situated near d monitor's
osd control ic (microprocessor), it is probably short....[refer the
connection n area around the front panel cn connector and crystal clock
generator]..beware u must b a professional
Go to control panel then add hardware then once that is don't click on ive connect the hardware then see witch hardware isn't connected then press search from the software\are
×