Canon MultiPASS MP390 All-In-One InkJet Printer Logo
Karen Nealy
Karen Nealy Posted on Dec 05, 2012
Answered

I change the cartridge but it stills display put in cartridge

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Apr 07, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Apr 07, 2013
Answers
1
Questions
0
Helped
61
Points
1

Hold down the power button. Let the printer shut off. Turn it back on. From Windows Start button, go to Control Panel - Printers & Faxes; right-click on Canon MP390, click on Printing Preferences, open the tab for Maintenance, click Quiet Mode and choose Always Use Quiet Mode. When the error recurs, cancel all pending print jobs: double-click on the printer icon in the tool bar (bottom right corner of monitor) to open the Print Queue, click on the jobs, then press the Delete button on the keypad. After all pending jobs are deleted, power down the printer by holding down its On/Off button. After 2+ minutes, turn it back on & try again. Depending on how frequently you use the printer, you may find it's time for a replacement.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What's your question?my printer hp laser jet 400 pro is displaying use black cartridge install press ok to continue and I press ok change the cartridge still the same things
If you install a cartridge that has previously been installed you will get this warning message. Once you press OK you should be able to print normally. This message is to ensure you do not put the old cartridge in by mistake (yes it happens), or someone does not try to sell you a used cartridge as new.
Read full answer
Aug 20, 2015 • HP Office Equipment & Supplies
2helpful
1answer

The display on my printer has stopped working, can I still change an ink cartridge without it?
You should be able to change cartridges. It may be hard to determine what is wrong with the display but look for loose connectors on the back of the display, the controller board, etc.
Read full answer
Nov 13, 2014 • Epson Stylus Photo R300 Inkjet Cartridges
0helpful
1answer

Printer display says "Print cartirdge(s)
when you replaced them did you go into the menu located on the printer and tell the printer that you were changing the cartridges out? If not the printer thinks that you still have not replaced them. To do this all you have to do is go into the menu select the option that says change my cartridges (or something like that) and remove the new ones and put them right back in the printer should then recognize the cartridges.
Read full answer
Jun 30, 2011 • HP PhotoSmart C4480 All-in-One Printer ...
1helpful
2answers

My canon MP 145 printer displayed E5. How can I solve my problem?
E5 means your cartridge error. May I know are you using original ink cartridge or yours has been modified before?
I assume you to refill your ink cartridge before because E5 error won't appear after replacing new cartridge.
So, you need to take out both of your ink cartridge and then use a clean cloth to wipe them. After that, slowly put in back into the printer. If the error is still there after wiping it, try to do it till the error is gone.
I had tested this way with my own printer and it works again without needed to buy a new ink cartridge.
All the best and good luck =)
Read full answer
May 20, 2011 • Computers & Internet
0helpful
1answer

Error displays check and remove right cartridge
change new right cartridge.
Read full answer
Aug 07, 2009 • HP Office Equipment & Supplies
0helpful
1answer

Put in new 12a toner and still get, no toner cartridge on the display window
Make sure that the spring contacts where the cartridge goes in aren't bent in or dirty. Also, when you put the old cartridge back in,does the printer recognize it? If so, then your new cartridge is defective.
Read full answer
Apr 20, 2009 • Office Equipment & Supplies
0helpful
1answer

Error with Konica Minolta 2300W
Seems like when you changed the toner cartridge, that the cartridge is NOT SEATED PROPERLY when put back in the printer.

Take the cartridge back out and see if the side cover (held in place with one screw) is able to move freely on the cartridge, sometimes it sticks and won't allow the cartridge to run freely in the printer, thus this beeping noise and jamming of cartridge. there is also some small holes (three in total) on the inner side of cartridge (the side that goes in first) sometimes small bits of plastic are still stuck on the holes from manufacturing and you can remove this plastic around the holes with a knife, and give a free path for the cartridge to rotate.
Read full answer
Jan 27, 2009 • Minolta magicolor 2300W Laser Printer
1helpful
2answers

Empty ink error message
Hi, its sad to say but the printer sounds that needed to be send to the nearest service center in your area. You already reseat & replace the ink cartridge and issue still present. Please call your printer manufacturer so that they can give you more options aside from sending it to service center. Thank you so much,

Tirzo
Read full answer
Jun 24, 2008 • HP Officejet Pro L7580 All-In-One InkJet...
0helpful
1answer

Black Cartridge just changed, but still says K-toner low
The only way to clear the message is to wait until the the display shows XXXX Toner Out, then change the cartridge and the message will clear itself.
Read full answer
May 18, 2008 • Epson AcuLaser C4000 Printer
0helpful
2answers

Overiding Empty Cartridge error for Dell A10 962
I would take out both cartridges and put them in again. Realign the printer and the error codes should remove themselves. Try turning the printer off and on before puting the cartridges in again. That may make a difference. You can let your computer know not to tell you when the ink is low too. Let me know how this work for you.

Cynthia Charczenko
Read full answer
Dec 26, 2007 • Dell A940 All-In-One InkJet Printer
Not finding what you are looking for?

View Most Popular

MultiPASS MP390 All-In-One InkJet Printer

  • Office Equipment & Supplies

Related Question

What's your question?my printer hp laser jet 400 pro is displaying use black cartridge install press ok to continue and I press ok change the cartridge still the same things

  • HP Office Equipment & Supplies

Related Topics

71 views

Ask a Question

Usually answered in minutes!

Popular Questions

Canon MP390 - "Data Error Press Set Key" Message

Canon MultiPASS MP390 All-In-One...

Reset Ink levels for canon mx310

Canon MultiPASS MP730 All-In-One...

PROBLEM COPYING WITH MY ALL- IN- ONE

Canon MultiPASS F60 All-In-One...

Printer not responding to the computer

Canon MultiPASS MP390 All-In-One...

CANON MP730 ERROR MESSAGE 343 WASTE INK FULL

Canon MultiPASS MP730 All-In-One...

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. MultiPASS MP390 All-In-One InkJet...

MultiPASS MP390...

Loading...