NEC Electra Elite Display

SOURCE: I have sixteen button NEC Electra ELite Multiline Telephones in my office-

Here's how you adjust the time:

1. Press <TRANSFER>
2. Press <CONF>
3. Press *
4. Press <TRANSFER>
5. Press <CONF>
6. Press #
7. "CAT MODE" displayed on LCD
8. Press <REDIAL or LNR/SPD>
9. "COMMAND" displayed on LCD
10. Press 02
11. Press <RECALL>
12. Press 2
13. Press <RECALL>
14. "02>2>Current Time" displayed on LCD
15. Input correct time using military time (HH MM SS)
16. Press <CONF>

SOURCE: Need more rings

You have to change the rings from the voice mail server. If you don't know your way around the server, its best to get a local NEC tech although it is fairly simple to navigate. Depends on your skill. Typical default password for the server is NEC

SOURCE: NEC Electra Elite

you need to access program mode. Did you contact your nec vendor? ldtsnj.com

SOURCE: How to change time on NEC Electra Elite IPK? I

You have to be on the root phone or "first phone".
To check various phones -Hit {feature} 4.
Should display 100= TEL 01. Once on the first phone then use {feature} 9 #.
Time will flash at top of display and can be adjusted.

If you are not on the first phone you will get error at the top of the display. Leave the hand set on the hook.

SOURCE: I can't cancel the Call Forward Busy/No Answer feature . . .

The installer could have changed the default codes, or try 45. So you would hit speaker than 45. If not try it from the operator phone(x) press speaker, 44.