Sharp R-9H56 Microwave convection oven

Owner's manual is available here ...

http://www.sharp.co.uk/cps/rde/xbcr/documents/documents/om/20_mwo/R654M_OM_COOKBOOK_GB.pdf

To set the time push the clock button, then push the numbers in and lastly push the clock button a second time. good luck with it.

http://www.usersmanualguide.com/sharp/microwave/r-242m

Theres your manual...

click Download
R-242M pdf user manual

Then either click view or download...

I have the manual for the R-8310 convection microwave oven by Sharp. Contact me @ [email protected].

bad key pad new oven probably cheaper than fixing

What usually breaks is the door open lever.

The outer cover will need to be removed to diagnose and repair this. Please unplug the oven first.

If you or someone you know wants to look into this, we have critical safety, disassembly, and troubleshooting info at our site, and our link is at our listing here on FixYa.

Once it is apart, you'll be able to see how the door open button would press against the door open lever, which would then lift up against the door latch heads (hook-like projections on the door) and the door should open.

You can probably find exploded views and order parts by entering your model number here at the Sears parts site. The best place to order Sharp parts is Tritronics.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

http://www.sharpusa.com/products/TypeDownloads/0,1087,5,00.html
Here is a link for your model.

Found this posted under Whirlpool instead of Sharp, but I'll be happy to answer it here.

While that one may not be available, we have one that may be close enough to work:

http://www.microwavedisplay.com/r9h66_r9h76_r9h84b_r9h94b_om.pdf

We're happy to help and we appreciate your thoughtful rating of our answer.

at highvoltage section wiring may bae problem, check wiring and connectrors of magnetron and capacitor and transformer.

Check that the plastic connector from your motor to the turn table is not broken , mine broke and it took weeks to solve the problem. Try rotating the part that protrude into the oven. If you can turn it by hand it is broken, lucky cheap to replace