I have a he4t - the soap won't totally dispense from the dispenser. it turns hard and stays there
Mine had the same problem. You need to remove the three screws at the back top edge of the machine. Then push the top panel back slightly, and the top panel will lift off. Under the top panel, you will find a complex system of cams and gears just above the soap dispenser door. You will find soap residue around a small arm that has a spring attached to it. Clean the soap residue. Be careful not to dislodge the spring. I used automotive wax to keep soap buildup from reoccuring, and to make the arm move freely. Let me know if you have any problems with my description, I will post some photos.
Remove the soap tray and clean the orifice.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
638 views
Usually answered in minutes!
×