How do I get my wireless from one end of thr house to the other

Michael Galve

• 1269 Answers
• Posted on Oct 14, 2008

SOURCE: connecting 2 wireless routers

As a wi-fi technician, it is not recommended to extend the wireless signal using another wireless router. Having 2 wireless routers will just cause conflict to your wireless network. If you still have time, please replace the router with a Wireless Access Point (WAP54G). WAP is easy to setup. Just plug it to one of the ethernet port on the back of your router and run the setup CD that came with it, that's it. It'll extend your signal.

If your main concern is just extending your wireless signal to another far place outside your house, Wireless Range Expander (WRE54G) can also be used. It is a similar device like an Access Point but its signal extending capability is more powerful than Access Point. Its also easy to setup, just the setup CD that came with it.

You can also contact the Linksys toll free tech support # at 1800-3267114 if you wanna resolve the issue over the phone. Hope that helps.

-Regards

SOURCE: Intermittent/non-existant connection with LinkSys WRT54G router

I would get a Range Expander... it sounds like you are having problems recieving a constant signal. When you do get the range expander plug the Range Expander halfway between you upstairs computers and your downstairs where your router is at. I hope this helps!!

Sincerely,

cdixon18
The ManInsideTheMachine

SOURCE: my wnr3500 router will not detect my usb760 modem

Yes you can there are some wireless router now that will work with it, you can check one from Linksys and Belkin also has one..

SOURCE: flashing wifi symbol on netgear wireless router. iphone help

Hi

I will try to help you out with this....

Might be you tried to cinnect with the network many time thats why its keep on disconnecting,

you can delecte all the netwoks that you have in you 3G Iphone and try to connect fresh, if its still give you the same error then you need to change the channel on the router if still it wont connect I suggest you to change tehw ireless settings on you router and reconnect all the computer and you Iphone again with the new network...

Steps are below before you change any settings on teh router i would like to inform you that you will loss your wireless connection till you reconfigure and reconnect you computer with the new network again........

open the internet explorer on your wired computer
type in 192.168.1.1or you can type http://routerlogin.com
, it will prompt you for user name and password, the user name will be 'admin' and password will be 'password', make sure you type it in small case

click on the wireless settings under the heading of setup

check out another screen shot below :


a. Change Name SSID : name of your network that you want to have
b. CHANNEL : Change to 11 and if uts 11 change it to 06
c. Mode : change to G&b
d. Sceurity : Select WEP
e. Key1 ; type any 10 digit number or you can type 1020304050, as mention above as the password for your wireless network

you will able to see your wireless network name on your computer, simply select it and it will prompt you for password that will be your 10 digit number you punch in Key1

connect with it and you are ready to go with your wired and wireless connection

I hope above mention will resolve your concern.....

Thanks
Harmeet :)