Won't spray
Here's a quick link to helpful tips. http://www.bissell.com/FAQDetail.aspx?id=1085&cid=ccsocial
SOURCE: I bought a bissel quicksteamer
if you bought ot new.its under warantry, take it back were you bought it, you are covered under the sale of goods act the, shop has to fix the problem
SOURCE: my bissell spot lifter model 1716 won't spray water at all, how do i fix this?
ok - this works even though it probably isn't the "best" solution. Unclog the input and output nozzle ares with a pin. The input area (behind the solution) was my clog problem - I put 2 or 3 drops of CLR into the hole, waited 5 minutes, then primed the trigger. This unclogged it! Fill the tank with a 1:1 ratio of white vinegar and warm water. Insert tank into unit and spray out the contents into the sink. This will eliminate any leftover CLR residue and clean the nozzle thoroughly. For the intake (suction part of the tank) I just rinsed through the lines with the vinegar mix and it seemed to unclog the rest. These things are a pain to take apart and if you break any pieces you'll be stuck - replacement parts have been discontinued for older models.
1,164 views
Usually answered in minutes!
×