Can thris protron tv be mounted on a wall?

Yes, it can be mounted on the wall mount bracket system. You may not have bought the universal adjustable mounting bracket type to match the VESA mounting dimension (the four monting holes spacing measured in mm).
See example here:
http://www.affordablehdtv.com/advanced_search_result.php?osCsid=3q5p8vevt3jbjuj19qc2mu4rr1&keywords=pltv-32&x=25&y=9

Please leave rating if it helps.

The wall mounting kit should come with all kind of screws to attach the mounting barckets to the back of the TV. Most TV uses metric M5 or M6 screws for the mounting holes on the back of TV, you should be able to get them at HD or LOWE for about 35 cents each.
My kits come with a bunch of Metric screws. Do you have the instruction sheet of the mounting kit?

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

have a PROTRON Flat screen tv SRS BBEDigital that I will like to install on the wall. I do not see any holds in back of the TV for a mounting bracket. How do I mounted on the wall?

Look here for the VESA mounting size for your TV
http://www.ergoindemand.com/vesa_chart_panasonic.htm

Then Google for 'vesa mount for Panosonic TH42PWD7UY' you will see a lot of mounts. Such as one on EBAY:

http://cgi.ebay.com/Wall-Mount-for-Panasonic-TH-42PZ77U-Plasma-TV-TH42PZ77U_W0QQitemZ380167357436QQcmdZViewItemQQimsxZ20091013?IMSfp=TL091013166006r2609

http://www.bizrate.com/tv-mounts/panasonic-42-plasma-wall-mount/

I had this problem on my 42" Philips LCD. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

No dont do that ! you will need to buy a wall mounting unit...you can find at best buy wall-mart and other electronic stores!

I have my 32" Protron mounted on my wall. There are six holes on the back of the set that you attach the mount. I cant find any links to pictures but it should be pretty straight forward. You should be able to use any generic LCD wall mount, just make sure it can hold an 32" since I made the mistake thinking all wall mounts were the same. I purchased mine at Best Buy but you should be able to find a mount anywhere. You will need to fasten the mount onto the studs in your wall. Drywall by itself will not be sufficient and cannot support the weight of the TV.

The wall mount should come with everything you need, e.g., screws, brackets, etc., with the exception of the tools. FYI... it's not going to be an easy job so be patient and take your time. It's probably going to take the good portion of a day. Also, as for the holes on the back, just be careful when performing the final mount to make sure it doesn't fall. It would be wise to have someone help you.

The universal mounts generally have a selection of screws that are to fit different makes and models of tvs.
If you bought the appropriate size mount for the size of your TV, there should be mounting holes that match your TV, and screws that will secure it.
I have not seen any mounts that use more than four.

I purchased my tv mount from Ultimate Electronics/ Las Vegas, NV. The name of company is Omni Mount, model: U2 Fixed. The phone number is 1-800-MOUNT IT. Good Luck.

I have wall mounted my Protron. Here is a website that has a picture of this wallmount: http://shop4.outpost.com/product/5374318?site=sr:SEARCH:MAIN_RSLT_PG There is a metal plate screwed into the back (near the top) of the set. The wall mount attaches to the back of that metal plate. Only problem is, I can't remember if that metal plate came with the tv, or with the mount. This mount can swivel up, down, left or right up to 15 degrees. It worked well for us. If you don't go with this mount, make sure the one you decide to get can handle the weight, and has VESA compliant mounting points. One word of advice, save the screws (and label it), so if you ever decide to use the base again, you can find it. I'm learning that lesson the hard way.