Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This is a trouble code for a fill that is taking to long. Make sure that both the hot and cold water valves are turned on. Hope this helps.
Posted on Jul 28, 2009
SOURCE: bosch 100 series will not drain
You need to check and clean the pump filter if you have not already done so.
This is located at the bottom front right of washer.
Unscrew anti-clockwise to remove and clean.
Posted on Mar 15, 2010
First, unplug your washer. After that find the little round plate below your drum opening on the exterior of the washer. It should have a small hole in it. Use something to gently push trough this hole and twist the cover off, Inside there you will find the drain access. Be careful, if there is water in your drum this will make a mess when you unscrew the drain access. Take the usual precautions and unscrew the drain access slowly until it is off. Remove any obstructions and replace access door and cover. Clean up any mess and plug back in your washer and try again. takes about thirty minutes to an hour depending on how much water is in the drum.
Posted on Sep 21, 2010
Tips for a great answer:
Jul 24, 2014 | Bosch Nexxt 500 WFMC3301 Front Load Washer
Mar 13, 2014 | Bosch Nexxt 500 WFMC3301 Front Load Washer
Nov 21, 2010 | Bosch Nexxt 500 WFMC3301 Front Load Washer
Jun 07, 2010 | Bosch Nexxt 500 WFMC3301 Front Load Washer
Jul 28, 2009 | Bosch Nexxt Premium WFMC6400UC Front Load...
Mar 28, 2009 | Bosch Nexxt 300 Series WFMC2201UC
Dec 21, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
Oct 28, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
640 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: