Netgear wg111v2 serial number - NetGear WG111V2 Wireless Adapter

Hello download the driver here:

http://support.netgear.com/product/WG111v2


Hope this will help you

You will need to install the drivers for the wireless adaptor. The flashing blue light simply indicates that there is activity (communications) with a wireless access point.
You can find the drivers for it here;

http://netgeardownload.registria.com/single_page_registration?product[sku]=WG111v2&download_url=ftp://downloads.netgear.com/files/WG111v2_v4.0.0.zip

~KenjiFox

In this case follow the steps:-
a)Try another computer or try all the ports on the same computer.
b)If the problem still presist then try to run the computer on a safe mode and check the connectivty.
c)Upgrade the drivers of the adapter from the netgear website.
Following direct links will be useful as the instuctions of upgrading the drivers are enlisted in there:-
For WG111v1 or WG111(Version 2.1):-
http://kb.netgear.com/app/answers/detail/a_id/711
For WG111v2 (Version 3.4.0):-
http://kb.netgear.com/app/answers/detail/a_id/713
For WG111v2 (Version 1.5.0):-
http://kb.netgear.com/app/answers/detail/a_id/2733

Hi, Download them from here:

http://kb.netgear.com/app/answers/detail/a_id/714


I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Hi!

Well, it asks you for the login code, if you havent set that code then its set by the manufacture, it should be in the manual who came together with your netgear, it looks like something like this:
ACFG-ABF2-0EDF-11AD-CDFE-A,
Try to find it in the manual.

Good luck to you
Nic

Not sure if this is where you are looking, but it probably is. click START then CONNECT TO then SHOW ALL CONNECTIONS then right click LOCAL AREA CONNECTION click STATUS then SUPPORT,,,
or CONTROL PANEL then NETWORK CONNECTIONS then right click LOCAL AREA CONNECTIONS then click STATUS then SUPPORT tab
See what you have there for an IP address
Is it the computer you don't have an IP for or the router? In my case my computer IP the 8th or last digit is the next number after what it is for the router. The other numbers are the same

Sorry, forgot to mention this earlier. Maybe netgear offers free Live Chat tech support. Go to their web site.

I cant help sorry

have you configure your netgear wg111v2

the software is found on this page
http://kbserver.netgear.com/products/wg111v2.asp

on the left side