SOURCE: factory settings
If windows still boots ( and the original hard drive is still in the computer) you can click the start button and find the HP Recovery Manager under the All Programs list. It is probably tucked away under one of the HP tabs.
If windows doesn't boot, and you still have the original hard drive you can press F11 when your first turn it on at the HP logo screen. It should start the recovery program. (The F key can be different on different laptops but most recent HP's are F11)
Be careful, doing a System Restore will erase all your Data, so backup anything important!
SOURCE: factory restory hp pavilion dv 1000
If your OEM is original from manufacture, and this option was installed. Restart PC, at the HP intro screen type "f11" 4 times, choose recovery, make shure you choose "restore to manufature settings" gl hope this works for you.
SOURCE: I have hp pavilion dv 8000 and i get the error
system BIOS on hp motherboard allow hp approved hardware to be detected.if you want install net adapter that was not approved you have to remove BIOS whitelist & then flash the hp motherboard with modified BIOS.
SOURCE: I want to restore my hp pavilion dv5 notebook to
Restart system and hold down the F11 function key till you hear a beep.
This will bring up the system restore dialogue, then follow the system prompt/ instructions.
Remember to backup your documents.
Good luck and rate this.
SOURCE: hp pavilion dv 8000 will not boot from DVD drive or hardrive
when u start ur system try pessing f8 or f10 or watever is the key for boot option nd from there u can select from which device to boot
140 views
Usually answered in minutes!
×