I put in a tape then I get a red lettered warning that says auto off s reel lock
SOURCE: converting vhs tapes to computer using camcorder
I think it's possible if you change a setting on your camcorder. Turn your camera on to VCR and then hit the menu button. Look at 4. AV In/Out Setup and make sure your DV Out is set to ON. I think this will make it work. If not, try changing your playback functions. I think the problem either lies with the fact that the camera is using its RCA connections as outputs instead of inputs, or it's not sending the signal on to the VCR.
Hope this works for you -
SOURCE: AG-DVC30 "no tape in camera" error message
thats probly the cass in swicth
or a dirty sensor....
hope that will help..
SOURCE: Panasonic AG DVC30. ALMOST new..only
This being a new set and if under warranty you MUST not attempt to openor tamper so as to VOID the warranty.
Now the obserrvation of the fault seems to be linked to a problem in the main processing board.
the static noise indicates that the servo or the luminance.
The fault requires that you will need a proper signal trace, use of an oscilloscope for video signal and a use of a proper service manual and Jig for looking into the board when it is disembled.
hence my request for such a fault seems that it be checked with the service center, take estimate and decide.
Sometimes a fault connection, and inter board connector, loose grounding or a improper shield, or dry soldering in the linking cords/ boards can be the reason but will require a close look with a magnification glass.
SOURCE: Panasonic AG DVC30 purchased on ebay. Getting
This is usually caused by an oxidized, misaligned or defective Audio/Video drum. You can try running a cleaning tape through the camera. If this does not solve the problem the camera will need to be serviced by a qualified service technician. My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair cost low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs. If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .
682 views
Usually answered in minutes!
×