I am having problems with my cord when I move the iron the iron shuts off. How do I fix this problem? DM880.

Question 1

0helpful

1answer

My Rowenta iron gets too hot and smokes.

time for the bin not worth fixing

Aug 13, 2021 • Rowenta Professional Luxe DM880 Iron

0helpful

1answer

I have a rowenta proffesional luxe iron but the cable keeps turning it off so when i move the cable it goes back on and when i am ironing it shuts off

you have a open circuit that occurs due to a wire loose at the plug end or a loose connection within the iron. a break in the cable will also display the systems you discribe. check for loose connections before you decide to replace the cable. by keeping the cable stationery when the iron is on at the plug end check wether it switches off when you move the cable near the plug end.if it switches off the loose wire is in the plug if it does not the try the moving the cable nearer the Iron end.

Apr 10, 2011 • Rowenta Professional Luxe DM880 Iron

0helpful

1answer

While ironing the power goes off and on , if I hold the cord in one place it stays on like it should how can I fix it , or get a new cord w/ball ? We love our iron just would like to fix problem, Thanks...

Hi am having the same problem can it be fixed

Apr 09, 2011 • Rowenta Professional Luxe DM880 Iron

0helpful

1answer

The electrical cord seems to have come loose near the iron itself causing the iron to shut off. is this a known problem & how do you fix it?

This has been happening since the first cord was attached to the first electric iron. The cord takes a beating. You will have to disassemble the handle and fix it ... or get a replacement.

Oct 06, 2010 • Sunbeam 6062 Iron with Auto Shutoff

0helpful

1answer

Rowenta iron won't heat

Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Jun 10, 2010 • Rowenta Professional Luxe DM880 Iron

0helpful

1answer

Power cord sparked and burnt. What tool do you use to get the two screws out to replace the power cord? Screws have a pattern I've never seen. Rowenta DM880 Iron

They are called TORX screws. You need a torx set of drivers.

Feb 12, 2010 • Rowenta Professional Luxe DM880 Iron

4helpful

2answers

Rowenta DM880 Auto shutoff - Shuts off too frequently

This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Jan 06, 2009 • Rowenta Professional Luxe DM880 Iron

0helpful

1answer

DM880 Rowenta Professional Luxe Iron

Hi,
The thermostat is bad...

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Jul 20, 2008 • Rowenta Professional DE880 Iron

5helpful

1answer

Iron not staying on

This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Jun 27, 2008 • Rowenta Professional DE880 Iron

0helpful

1answer

Rowenta dx6700

The wire inside the cord is likely torn ant it connects and disconnects as it is moved back and forth. This happened to me too. I just need to find where to get a new cord.

Sep 23, 2007 • Rowenta DX6700 Iron

Question 2

francoise cleofas

Irons Master 2,432 Answers
Posted on Nov 30, 2012

francoise cleofas

Irons Master

Joined: Apr 04, 2011

Answers

2432

Questions

0

Helped

298367

Points

6852

Just replaced the power cord, you can buy wire and plug then assembled it to the iron and replaced the old power cord which may cause of shut off.

Denise buchmuller Jan 02, 2013

We replaced the power cord and that fixed the problem. Thank You.
Anonymous Mar 25, 2013

were did you get the replacement cord? were did you get the replacement cord?

×

Answer 2 · 3/6/2009 12:00:00 AM

Anonymous

18 Answers
Posted on Mar 06, 2009

SOURCE: iron not staying on

This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Anonymous

18 Answers
Posted on Mar 06, 2009

SOURCE: Rowenta DM880 Auto shutoff - Shuts off too frequently

This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Anonymous

19 Answers
Posted on Aug 16, 2009

SOURCE: I live in Little Rock Arkansas, where can I get

there are screws that hold the wire down under the cover sounds like the metal tip on one of the wires has broke off

electronic & computer repair& servicre

12061 Answers
Posted on Feb 12, 2010

SOURCE: Power cord sparked and burnt. What tool do you

They are called TORX screws. You need a torx set of drivers.

Anonymous

43501 Answers
Posted on Jul 14, 2010

SOURCE: DM880 Rowenta Professional Luxe Iron

Hi,
The thermostat is bad...

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Answer 3 · 3/6/2009 12:00:00 AM

Anonymous

18 Answers
Posted on Mar 06, 2009

SOURCE: iron not staying on

This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Answer 4 · 3/6/2009 12:00:00 AM

Anonymous

18 Answers
Posted on Mar 06, 2009

SOURCE: Rowenta DM880 Auto shutoff - Shuts off too frequently

This is a problem with a lot of Rowenta irons. It is the auto shut off that is not working properly and the only way to fix it is to have it disassembled and the switch hardwired to be on whenever the iron it plugged in. It is a thermal metal switch and it just stops working and then the iron will not turn on and the yellow light blinks.

Answer 5 · 8/16/2009 12:00:00 AM

Anonymous

19 Answers
Posted on Aug 16, 2009

SOURCE: I live in Little Rock Arkansas, where can I get

there are screws that hold the wire down under the cover sounds like the metal tip on one of the wires has broke off

Answer 6 · 2/12/2010 12:00:00 AM

electronic & computer repair& servicre

12061 Answers
Posted on Feb 12, 2010

SOURCE: Power cord sparked and burnt. What tool do you

They are called TORX screws. You need a torx set of drivers.

Answer 7 · 7/14/2010 12:00:00 AM

Anonymous

43501 Answers
Posted on Jul 14, 2010

SOURCE: DM880 Rowenta Professional Luxe Iron

Hi,
The thermostat is bad...

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Related Topics:

Trustworthy Expert Solutions

I am having problems with my cord when I move the iron the iron shuts off. How do I fix this problem? DM880.

1 Answer

francoise cleofas

5 Related Answers

Anonymous

Anonymous

Anonymous

electronic & computer repair& servicre

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My Rowenta iron gets too hot and smokes.

I have a rowenta proffesional luxe iron but the cable keeps turning it off so when i move the cable it goes back on and when i am ironing it shuts off

While ironing the power goes off and on , if I hold the cord in one place it stays on like it should how can I fix it , or get a new cord w/ball ? We love our iron just would like to fix problem, Thanks...

The electrical cord seems to have come loose near the iron itself causing the iron to shut off. is this a known problem & how do you fix it?

Rowenta iron won't heat

Power cord sparked and burnt. What tool do you use to get the two screws out to replace the power cord? Screws have a pattern I've never seen. Rowenta DM880 Iron

Rowenta DM880 Auto shutoff - Shuts off too frequently

DM880 Rowenta Professional Luxe Iron

Iron not staying on

Rowenta dx6700

Not finding what you are looking for?

Irons

My Rowenta iron gets too hot and smokes.

Ask a Question

Top Irons Experts

john h

ADMIN Andrew

ADMIN Eric

Are you an Iron Expert? Answer questions, earn points and help others

Manuals & User Guides

131692-8.pdf. user-manual-Stiromeglio...

7258.pdf. user-manual-7258.CL -...

Proctor Silex Steam Iron 17580T.pdf....

Related Topics:

Trustworthy Expert Solutions

I am having problems with my cord when I move the iron the iron shuts off. How do I fix this problem? DM880.

1 Answer

francoise cleofas

5 Related Answers

Anonymous

Anonymous

Anonymous

electronic & computer repair& servicre

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My Rowenta iron gets too hot and smokes.

I have a rowenta proffesional luxe iron but the cable keeps turning it off so when i move the cable it goes back on and when i am ironing it shuts off

While ironing the power goes off and on , if I hold the cord in one place it stays on like it should how can I fix it , or get a new cord w/ball ? We love our iron just would like to fix problem, Thanks...

The electrical cord seems to have come loose near the iron itself causing the iron to shut off. is this a known problem & how do you fix it?

Rowenta iron won't heat

Power cord sparked and burnt. What tool do you use to get the two screws out to replace the power cord? Screws have a pattern I've never seen. Rowenta DM880 Iron

Rowenta DM880 Auto shutoff - Shuts off too frequently

DM880 Rowenta Professional Luxe Iron

Iron not staying on

Rowenta dx6700

Not finding what you are looking for?

Irons

My Rowenta iron gets too hot and smokes.

Ask a Question

Popular Questions

MY ROWENTA 1550W UPRIGHT STEAMER NO LONGER

Rowenta Steam Iron Leak

Why does my iron keep setting the trip switch off.

Plugged in, reset button is lit, won't go off

My Iron keeps tripping the fuse in main power box what is causing this it doesn't happen with any other appliances?

Top Irons Experts

john h

ADMIN Andrew

ADMIN Eric

Are you an Iron Expert? Answer questions, earn points and help others

Manuals & User Guides

131692-8.pdf. user-manual-Stiromeglio...

7258.pdf. user-manual-7258.CL -...

Proctor Silex Steam Iron 17580T.pdf....