Question about Dual Electronics CECT P168 Cellular Phone

5 Answers

HOW CAN i FIX M I9 phone/

CANNOT GET TO THE MAIN PAGE, BUT IT CAN RECEIVE calls.

Posted by on

  • vadyms Jan 12, 2009

    Hi, Yes i have the same issue like you had, but I did all possible steps that you wrote above, but it still in stuck I CANNOT SLIDE TO GET TO THE MAIN MENU. THANKS, VADYM

  • Anonymous Feb 18, 2009

    i have the same problem

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I HAVE A i9 PHONE THAT I CAN NOT MAKE CALLS BECAUSE IT KEEP DROPPING MY CALLS AFTER TALKING ONE TO TWO MINUTES ON THE PHONE. I CAN NOT USE THE CHARGER BECAUSE I INTERCHANGED A 1500mAh BATTERY WITH A 2800mAh BATTERY USING THE SAME CHARGER AND I THINK THAT PROCESS ZAP MY PHONE. WHAT CAN I DO TO RESTORE MY PHONE.

Posted on May 02, 2010

Ad

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My touch screen stopped working one day. I opened the I9 and found that when I pulled the screen taunt it worked. Does anyone have an idea? Maybe a diagram? Thanks

Posted on May 30, 2009

Ad

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My mms messeges dont work on my i9

Posted on Mar 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My touch screen doest work how can i fix it

Posted on Mar 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 31 Answers

Is it stuck..like the slide feature wont let you slide to get to the main menu??? Mine did this and it lasted for almost a day..i had top take the battery and sim card out and keep putting them back in and keep turning it off and on and eventually it became unstuck. and has worked since and not gotten stuck..if its not that then let me know..also

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my cordless food set to register. Cannot receive calls or call out. Message says the device is not registered


Please use the below link and complete steps 1-4 before holding down the main base's LOCATOR button.

http://service.us.panasonic.com/OPERMANPDF/KXTG4221-MUL.pdf#page=21

Jun 04, 2014 | Panasonic KX-TGA421N Dect 6.0 Plus...

2 Answers

Who know the call barring password for nokia E52 plz help !! :):) thnx


I am having a problem in incoming calls, there is red cross(inside red circle) appeared on my main screen of my mobile E52. The incoming calls appeared in received call but i cann't receive my incoming calls. If you have the solution please let me know

Apr 06, 2010 | Nokia E52 Smartphone

1 Answer

Whenever some tries to call me while using my DSL,


It sounds as if your PC's fax/modem card is set to automatically receive faxes, so the PC answers the phone whenever it's on. To fix this, you need to set your fax modem to receive manually (or disabled if you don't use it to receive faxes). Open the Printer and Faxes (Windows XP) and double click the fax icon. If this is the first time you've opened it, you'll have to go through the fax configuration wizard, if not, you'll be presented the Fax Console. Click on Tools, Configure Fax. On the second page of the configuration wizard, you'll be presented with the select fax device. This is the page where you select to enable fax sending and receiving. Turn off the Enable Receive check box if you never want to receive faxes. Leave it on, but set to manual if you want to be able to manually receive faxes (every time your phone rings, you'll have a notification in the system tray asking if you want to receive a fax).

Jan 30, 2010 | Computers & Internet

1 Answer

Cannot get the menu page and cannot turn off


Remove the battery for few minutes and then start your iphone again

Jun 17, 2009 | Apple iPhone Smartphone

2 Answers

How to set machine to receive incoming fax?


Quoted from the manual: The HP all-in-one will not automatically answer calls. You must receive all faxes manually by pressing Start Fax Black or Start Fax Color. For information on receiving faxes manually, see Receive a fax manually. You might use this setting if the majority of calls on this phone line are voice calls and you rarely receive faxes.
This page has more information: http://www.fixya.com/support/p378554-hp_officejet_6210_all_in_one_inkjet/manual-3600/page-86

May 23, 2009 | HP OfficeJet 6210 All-In-One InkJet...

2 Answers

Cordless Phone


When trying to make a call,messages appears unavailable on both hand sets that i have,i can not receive or send calls, but my land line does.

Oct 05, 2008 | GE 25932 Cordless Phone

2 Answers

Moto razr v3 is acting up


you need to reflash the phone

Oct 01, 2008 | Motorola Mobility RAZR V3

2 Answers

Canon image class MF4150 distinctive ring


How to Set the Receive Mode (MF4140/MF4150)
1. Press [Additional Functions]. 2. Use [Left cursor] or [Right cursor] to select [FAX SETTINGS], then press [OK]. 3. Use [Left cursor] or [Right cursor] to select [RX SETTINGS], then press [OK]. 4. Use [Left cursor] or [Right cursor] to select [RX MODE], then press [OK]. 5. Use [Left cursor] or [Right cursor] to select the receive mode, then press [OK]. [FaxOnly]: Answers all calls as faxes and disconnects voice calls. [AnsMode]: Receives faxes automatically and records voice messages. [NET SWITCH]: Distinguishes between fax and voice calls. [FaxTel]: Switches between fax and voice calls automatically. [MANUAL]: Does not answer any calls. You have to manually receive faxes. NOTE: a. For [FaxTel] or [MANUAL], make sure the optional handset or an external telephone is connected to the machine. b. For [AnsMode], make sure an answering machine is connected to the machine. c. The [NET SWITCH] mode is available for certain countries only and requires subscription to a network switch service. 6. Press [Stop/Reset] to return to the standby mode.

Aug 12, 2008 | Canon imageCLASS MF4150 All-In-One Laser...

1 Answer

Airplane Mode..


Here is the link to the user manual; http://www.nextel.com/assets/pdfs/en/support/guides/phones/i265/ug.pdf Check page 119 of the manual (129 of the pdf)says: "Sometimes you may want to have your phone on,but turn off its ability to make and receive calls, such as when you are on an airplane. To set your phone so that it cannot make or receive phone calls, Direct Connect calls, Group Connect calls, Talkgroup Calls; or transfer data: 1 From the main menu, select Settings > Advanced > Airplane Mode. 2 Set this option to On. This icon U appears. Note: Pressing p for more than 5 seconds also turns on Airplane mode. To restore your phone?s ability to do all these things: Set this option to Off." Hope this helps :)

Jun 29, 2007 | Nextel i265

Not finding what you are looking for?
Dual Electronics CECT P168 Cellular Phone Logo

1,015 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dual Cell Phones Experts

Ekse

Level 3 Expert

13434 Answers

kayceaz

Level 1 Expert

3 Answers

Tin Tin

Level 2 Expert

80 Answers

Are you a Dual Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...