Ruter tp-link efb6f6 pin - Computers & Internet

The pin code should be printed on the router itself. Each one is different.

just call them or send them a mail......tell your serial no.... and they will provide u with your pincode....telephone no. +86 755 26504400 (English Service).

E-mail
[email protected].

uplug your ethernet cord there shoud be a small button on side od router sometimes in back u might have to get a tooth pick or stick pin to push button in ok when u do this plug ethernet cord back in.

There is a small hole somewhere on the back (usually). Get a needle or a staple pin it down to push the button inside the hole. Hold the button 30 seconds to reset the ruter. After the reset you'll have to set it again as it is reset to its defaul user settings (user, password etc). Be sure that you have all the necessary info - IP adress to set it up and default user and password for your ruter (this info is in the manual, a Cd or a sticher on the bottom side of the ruter)

ok both computers will need a wireless card or stick you will need to install the software that came with them on both computers, them insert or hook up your cards after you do that you will need to open the software you installed and have it find available netorks if you see yours click on ( connect to) if you have enabled wep you will need to enter your password it should connect

qwit luking at ruter.