When using my Jenn-Air range I get the error code F1-1, I have unpluged the range, however I am still getting the error code when I use the range.
If it is the stove that is in the picture the fault codes are in the door under the oven door.
VANMAN69, I have looked in the door under the oven door and can not find the codes. Any more suggestions? I have had a repair man come and replace my control board but I am still getting the F1-1 fault code and when using the oven I get the F3-1 fault code.
Jennaire gas stove oven is electric temps over 4oo get an F1 error code and the oven shuts completely down clock and all power
8,315 views
Usually answered in minutes!
I am getting the F3-1 and F1-1 error codes. I had a repairman come to my home, and he installed a new "sensor"; however, the same day he installed the sensor, I am still getting these error codes.
we have also been getting this error code with beeping that happens randomly, but usually after the over has been used. It happens up to several hours when finished using the oven, many times in the middle of the night
We are having the same problem. Our repair man has suggested we kill the power to the stove for 48 hours to erase the memory to see if that works, so that is what we are trying now. It is certainly the cheapest option.
Same issue, Jenn Air gas range. Been getting the F1-1 error code randomly for months. The oven also won't hold a temp. Both issues are random, sometimes occur together but more often occur independent of each other (like when I'm roasting a chicken at 350 and check it about an hour into cooking only to find the oven temp at 180 with no beeping error at all!! Can you say salmonella?). Tech replaced the ignitor first ($100+), came back again and replaced the oven sensor ($150+) and still the issue + the addition of a very rare F3-1 error showing. Now tech is coming back to replace the clock/control board ($250+). So I'm up to just over $550 and hope I have a working stove after the newest fix! Had I known all of this, I would have put that $550 towards a new stove and kicked this dog to the curb. I've had nothing but issues with it.
By the way, I tried to kill the power for 48 hours and it didn't solve my issue. I hope that works for others...certainly cheaper than $550!
electric jenn aire has f1 and f3 error messages
surface where up arrow is has caved in
×