Normal
0
I suggest you get a sheet of Card Stock (Heavy
paper) and place it in the feed way. Then press the print
button applying a slight amount of pressure on the Card Stock so it
will feed through the printer. The reason for this is in some cases I
have been able to clear the paper track of debris that was deposited there
over time.
Worth a try, as I have fixed a number of printers this
way, saving costly repairs.
Hope this helps.
Bud
SOURCE: paper jam
Probley not but i think you may be able to extend you warantee if they will let you so they can fix the senser or what ever is casing it to do that.
SOURCE: I have a clx 3160fn printer and it does not pik up
No I have not yet fixt the problem I have tacken the printer to a repair shop were I hat to pay $50.00 up front they asct me to come at 3 o;clckin the after noon and the talled me there is somesing wrong with softwere and they have order it in from samsung they said the pikup shaft did only half a turn sted a full turn that takes a few days and they will let me know when to pick it up when I have it back I will let you know how things went kip you postet Matt
SOURCE: I have a Samsung CLX-3160FN, and after every page
Hi,
it is most likely that the fuser actuater arm is not sitting back to the sensor properly. open the back door you will be able to see the fuser, on your right hand side you should be able to see a fliper that sit in between a sensor. try to adjust the fliper flag and see if it works.
if it still continue to give you the same error. try remove the fuser four screw 2 side on each. adjust the flag again and fix it back. it should work and double check for any lose small pices of paper jam in the printer.
856 views
Usually answered in minutes!
It keeps trying to pull from the manual feeder and then can't actually do it. A lot of times you cannot even assist by pushing the paper in and it continually says paper jam. you then have to open one of the doors and close it and wait an EXTREMELY long time for the warm up period to end only to cross your fingers and try all over again.
×