Xerox 7345 error 009-383 - Xerox Fuser Cartridge 008R13040 for Work Centre 7328,7335,7345

Hi,

Please power off the printer, wait 30 seconds and then power it on again. Thank you.

There is a problem with mcu. Try reconect mcu plugs

https://www.huntips.com/m/jagadeesan-xerox-7245-xerox-error-code-062-380-xerox-workcentre-7228-7235-7245-7328-7335-7345-fuser-cartridge-008r13028-2238718/


https://www.huntips.com/m/jagadeesan-xerox-7245-xerox-error-code-062-380-xerox-workcentre-7228-7235-7245-7328-7335-7345-fuser-cartridge-008r13028-2238718

Hi this is mani please support me my problem workcentr 7345 wil come 024-360 how clear the problem please help 3

Press and hold the 0 key for 5 seconds and then while still holding, press the Start button. Enter password 6789 then press confirm.
Select Adjustments/Others, then initialize HFSI Counter then enter code 954-804, then select reset current value.

That error indicates that the paper was not sensed as passing the pob sensor which is right at the registration rollers. If the paper is folding there, the main cause is the registration clutch not being initialized or slipping. Replace registration clutch, part number: 121K22220

http://www.iteminconline.com/121k22220_121k22220-xerox-7760-registration-clutch.htm

take a look here:
http://www.copytechnet.com/forums/xerox/69138-xerox-workcenter-7328-7335-7345-7346-error-004-346-needs-reset.html

009-330 error code xerox work center 7345 problom & soluson

Hi, In my printer Xerox 7245 display it appears Replace Transfer belt error. So please guide me how to reset value without replacing ETB