Mother board layout diagram

http://h10025.www1.hp.com/ewfrf/wc/pfinderExceededMaxResults?query=dv6&cc=us&dlc=en&lc=en&tool=

You need to find the Mother Board diagram or manual, that will tell you were the pins are to plug it back in.

Contact HP here is your motherboard: Giovani-GL6, Giovani2-GL6

There are no schematics for desktop computers. If you mean mother board layout and manual then check here http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=3184139

this can be useful:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01742903&tmp_track_link=ot_recdoc/c01748305/en_us/c01742903/loc:1&lc=en&dlc=en&cc=us&product=3980091

my pc oso locked

User Manual available here:-
http://www.intel.com/support/motherboards/desktop/d101ggc/sb/CS-021718.htm

Hi pc_ski,
Download the manual for your board, click on this PDF link.
http://download.intel.com/support/motherboards/desktop/D845GLLY/ADLY_English.pdf

See page 64 first for the layout of the front panel header. The block you need to refer to is letter C. Here you'll see where pin one is located at.
Go to page 65. Table 32 shows the pin assignments for the front panel header. Pin-1 & pin-2 is for the HDD & pin-7 & pin-8 for reset switch.

Have more questions? Post here.
Good luck pc_ski!
Mike

[10][ 9] Pin 1 = +HDD pin 3 = -HDD LED
[ 8][ 7] Pin 2 = + POWER pin 4 = - power LED (SPD)
[ 6][ 5] Pins 5 & 7 = reset
[ 4][ 3] Pins 6 & 8 = Power switch
[ 2][ 1]


Hope you find this Useful

Dave

You don't need an adapter from 4 to 6 pin, the mother board needs a 4 pin atx connector.

You can download the complete manual from here: http://www.ecsusa.com/ECSWebSite/Products/ProductsDetail.aspx?detailid=685&CategoryID=1&DetailName=Manual&MenuID=46&LanID=9

And you can see the pins layout.

Let me know if you need more help