Applications won't go into blackberry - RIM BlackBerry Curve 8310 Smartphone

Hi,

The Block Erase 6 Reset error may result from corrupt data on your BlackBerry device.
To resolve this problem, you need to complete the steps:
Reload the BlackBerry Device Software by following these steps:

1. Install the BlackBerry Device Software on your computer.
2. Connect the BlackBerry device to the computer.
3. Open BlackBerry Desktop Manager.
4. Complete one of the following:
5. 1. If the Application Updates Available window appears, click Update Now. The Application Loader wizard appears.
   2. If the Application Updates Available window does not appear, double-click Application Loader. The Application Loader wizard appears.
6. Click Next.
7. If prompted, enter your BlackBerry device password and click Next.
   
   When the Application Loader wizard is finished examining the configuration on the BlackBerry device, the Device Application Selection screen appears listing the applications available for installation.
8. Select the check boxes next to the applications you want to load. Check boxes that are already selected represent applications that already exist on the BlackBerry device. If you clear those check boxes, the applications will be removed from the BlackBerry device.
9. Click Next.
10. If the On the Device Backup screen appears, choose whether or not to automatically back up the BlackBerry device.
11. Click Next.
12. Click Finish to begin loading the BlackBerry Device Software.
13. Click Close when the software is finished loading.

Inspite of this if you find the same error, you need to follow the steps:

1. Remove the battery from the BlackBerry device.
2. If a media card is inserted in the BlackBerry device, remove it.
3. Connect the BlackBerry device to your computer using the USB cable.
4. Open BlackBerry Desktop Manager and click Option > Connection Settings.
5. In the Connection Settings window, click Detect. Make sure the BlackBerry device is detected.
6. Close the Connection Settings window.
7. In BlackBerry Desktop Manager, double-click Application Loader.
8. In the Application Loader wizard, click Next to start the loading process. The Device Application Selection screen appears displaying the applications available to load onto your BlackBerry device.
9. Select the check boxes next to the applications you want to load. Check boxes that are already selected represent applications that already exist on the BlackBerry device. If you clear those check boxes, the applications will be removed from the BlackBerry device.
10. Click Next. The Completing the Application Loader Wizard appears listing the applications to be installed and removed from the BlackBerry device.
11. Click Advanced.
12. Select the Erase all application data check box, and then click Next.
13. Select the check box beside Do not automatically backup the application data during the loading process. This check box is selected because the data on the BlackBerry device may be corrupt.
14. Reinsert the battery into the BlackBerry device.
15. On the Application Loader wizard, click Next to proceed with the loading process.
16. When the process is complete, the Application Loader wizard will display the following message: The loading operation was successful.
17. Reinsert the media card if one was removed earlier.
18. Close the Application Loader wizard.

This happens because of large applications are installed on the BlackBerry smartphone.
To resolve this issue, complete the following steps:-

1. Make sure that the BlackBerry Device Software is installed on the computer to display the correct total application space.
2. Determine the application space that is available on the BlackBerry smartphone by completing the following steps.

a) Connect the BlackBerry smartphone to the computer.
b) Open the BlackBerry Desktop Manager.
c) Double-click Application Loader.
d) At the Device Application Selection screen, under the application selection window, note the total application space.

NOTE:-Select the List additional applications that are installed on the connected device check box to include the applications that are installed outside of the BlackBerry Device Software applications and the file sizes.
3) Remove applications that are not required. For example, remove additional language packs and themes.

When adding, deleting, or updating applications on your BlackBerry smartphone, your BlackBerry device resets itself and stops responding.You receive the following error message:
Device error 400

1. Disconnect your Blackberry smartphone from your computer.
2. Open BlackBerry Desktop Manager.
3. Open BlackBerry Application Loader.
4. Reset your Blackberry smartphone.
5. When the LED indicator has turned on, reconnect the BlackBerry smartphone to the computer.
6. Click Next.
7. On the following screen you will see either USB:Unknown or USB:; click Next.
8. Select the required applications from the applications list and click Next. The firmware is loaded to your BlackBerry smartphone.
   

Warning: The following procedures will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the data on your BlackBerry smartphone before performing this procedure.

When adding, deleting, or updating applications on your BlackBerry smartphone, you receive the following error message:
Device error 400
OR
your BlackBerry device resets itself and stops responding.

CAUSE
An unspecified error has occurred with an application on your Blackberry smartphone.

RESOLUTION
NOTE:The following procedures will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the data on your BlackBerry smartphone before performing this procedure.

1. Disconnect your Blackberry smartphone from your computer.
2. Open BlackBerry Desktop Manager.
3. Open BlackBerry Application Loader.
4. Reset your Blackberry smartphone.
5. When the LED indicator has turned on, reconnect the BlackBerry smartphone to the computer.
6. Click Next.
7. On the following screen you will see either USB:Unknown or USB:; click Next.
8. Select the required applications from the applications list and click Next. The firmware is loaded to your BlackBerry smartphone.
   

If it is application error then follow these steps: Warning: You should not install a version of BlackBerry Device Software that is earlier than the version installed on the BlackBerry smartphone. Doing so could cause the BlackBerry smartphone to malfunction. Before proceeding, make sure that the latest version of BlackBerry Device Software is installed on the computer by completing the following steps: Open BlackBerry Desktop Manager. Click Help. Select About Desktop Manager. Click the Device Software tab. Verify that the BlackBerry Device Software displayed is the latest version currently available from the wireless service provider. Warning: The following procedure will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the BlackBerry smartphone data before proceeding. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.1 to 4.3, complete the following steps: Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Next to start the installation process. Type your BlackBerry smartphone password, if prompted, and click OK. Select the check boxes next to the names of the applications you want to load, and then click Next. Click Advanced, and then select the check boxes beside Erase all application data and Erase all currently installed applications . Click Next. Select the check box next to Do not automatically backup the application data during the loading process (if prompted). Clear the check box next to Backup and restore applications installed wirelessly (if prompted). Click Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Close to return to BlackBerry Desktop Manager Note: BlackBerry Desktop Manager 4.3 will display the Delete all application data and Delete all currently installed applications check boxes in step 6 of the above procedure. To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager 4.5 and 4.6, perform the following steps: Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager. Double-click Application Loader. Click Add/Remove Applications. Type your BlackBerry smartphone password and click OK. Select the check boxes next to the names of the applications you want to load. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications. Click OK. Click Next > Finish. When the process has completed, the message The loading operation was successful will appear. Click Main Menu to return to BlackBerry Desktop Manager. Note: The Delete all application data and Delete all currently installed applications options are not available when using the Application Loader in BlackBerry Desktop Manager 4.5. A workaround for this issue is to use the Application Loader standalone file by performing the following steps: Open My Computer (or Computer in Windows® Vista?). Navigate to C:\Program Files\Common Files\Research In Motion\AppLoader. Run the Loader.exe file and follow steps 3 through 9 above to complete a clean installation of the BlackBerry Device Software.

After typing an incorrect password ten times and restarting the BlackBerry smartphone, the following error appears


All of the data and applications on the BlackBerry smartphone have been deleted


To perform a clean installation of the BlackBerry Device Software using BlackBerry Desktop Manager

1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
2. Double-click Application Loader.
3. Click Add/Remove Applications.
4. Type your BlackBerry smartphone password and click OK.
5. Select the check boxes next to the names of the applications you want to load.
6. Click Settings, and then select the check boxes beside Delete all application data and Erase all currently installed applications.
7. Click OK.
8. Click Next > Finish.
9. When the process has completed, the message The loading operation was successful will appear. Click Main Menu to return to BlackBerry Desktop Manager.

An unspecified error has occurred with an application on your Blackberry smartphone.


Resolution In BlackBerry Desktop Manager, run the BlackBerry Application Loader tool.
Note: The following procedure will delete all data and applications from your BlackBerry smartphone.

1. Disconnect your Blackberry smartphone from your computer.
2. Open BlackBerry Desktop Manager.
3. Open BlackBerry Application Loader.
4. Reset your Blackberry smartphone.
5. 1. Remove the battery cover.
   2. Remove and reinsert the BlackBerry battery to reset the BlackBerry smartphone.
   3. Replace the battery cover.
   To perform a hard reset on a RIM 850 device, RIM 857 device, RIM 950 device, or RIM 957 device, insert the end of a paperclip inside the small hole on the back of the BlackBerry device.
   
6. When the LED indicator has turned on, reconnect the BlackBerry smartphone to the computer.
7. Click Next.
8. On the following screen you will see either USB:Unknown or USB:; click Next.
9. Select the required applications from the applications list and click Next. The firmware is loaded to your BlackBerry smartphone.
   

Warning: The following procedures will delete either all data, or all data and applications on the BlackBerry smartphone. Back up the data on your BlackBerry smartphone before performing this procedure.

This error indicates that the data and applications on the BlackBerry have been deleted. You will need to reinstall the applications and restore the data from a backup (if available).

Below is a link to a tutorial on CrackBerry.com that shows how to install the applications (operating system) on to a BlackBerry:

http://crackberry.com/blackberry-101-how-install-or-upgrade-new-rim-operating-system-os