Question about Maytag Legacy Series Top Load Washer

1 Answer

Maytag legacy series washer not holding water

Top load machine: the cycle can not start because it will not hold water in the tub. It just keeps draining out.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem here. But according to Maytag Service, the draining pipe may be too deep inside the draining tube on the wall, thus creating a siphon effect and not allowing the tub to fill.
Their suggestion is to ckeck the pipe and make sure no more than 6-8 inches are inside the draining pipe. This should take care of the suction. We'll see, Imma do that when I get home.

Posted on Jan 15, 2009

Ad

1 Suggested Answer

  • 78 Answers

SOURCE: Forgot my username cant log into laptop, help

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Sep 22, 2014

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag legacy series washer


The drive motor which spins the drum is connected to the drum by a rubber belt. Sounds like the belt is burned through. Make sure you can spin the inside tub by hand to verify that the tub can turn freely before you replace the belt. The hum is from the drive motor just spinning freely.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Sep 02, 2016 | Maytag Legacy Series Top Load Washer

1 Answer

My maytag washer is always out of balance in spin cycle


the balance springs on the bottom of the tub underneath are stretch out of range they need to be replaced

Jan 17, 2010 | Maytag Legacy Series Top Load Washer

1 Answer

I have a Legacy SAV405DEWW machine wont run


I just had the same problem. The washer would stop about 2/3 through the spin cycle and not start again. Replaced the timer. That did NOT solve the problem.

Jul 20, 2009 | Maytag Legacy Series Top Load Washer

1 Answer

Maytag Legacy Series Top Load Washer model SAV515DAWW splashing


the agitator dogs are likely broken.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 10, 2009 | Maytag Legacy Series Top Load Washer

1 Answer

Maytag Legacy Series Washer. Lint settles on


Lint is in majority flushed out in drain cycle. make aire the tissue and match books aren't in any pockets. the lint is then deied and separated in the drier , Well so I was told . good luck

Jun 07, 2009 | Maytag Legacy Series Top Load Washer

1 Answer

Maytag legacy series tub wont fill


Your drain hose is too low or there is no air gap where the hose enters the drain line.
This causes the water to siphon out as it fills.

Mar 08, 2009 | Maytag Legacy Series Top Load Washer

1 Answer

Maytag Legacy washer MAV408DAWW loud noise, dumped all water


Tub bearings and seal have failed. My SAV405DAWW just started with the loud grinding and I am now in the process of finding out if I can fix it myself. Kurt

Jan 12, 2009 | Maytag Legacy Top Load Washer

1 Answer

Maytag legacy series washer top load-squeaky during wash and rinse


very possible if squeaks in agitation top springs that hold tub needs greased under spring & plastic shield under spring. had same problem on big front loaders whirlpool

Aug 31, 2008 | Maytag MAH2400A Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

595 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...