;how do i set time and date

Correct my date and time to update my phone ' Windows ...

www.windowsphone.com/.../correct-your-date-and-time...

Windows PhoneIf you're having trouble installing a Windows Phone update, correct your date and time settings manually.

How to Change the Date in Android ' Chron.com

smallbusiness.chron.com > ... > Setting Up a New Business Basics

Android phones normally pull the date and time from the Internet, but if there's a problem with the signal ... Click the "Settings" button to open the Settings menu.

2013 Models - How to Set the Date and Time on your ...

? 0:52
https://www.youtube.com/watch?v=jTSZwCLSiTk
Dec 4, 2012 - Uploaded by Panasonic Canada Help
In this video we will explain how to Set the Date and Time on your Panasonic Cordless telephone, models KX ...

How to Set the Date and Time on Your iPhone - For Dummies

To set the time and date on your Timex Indiglo watch with a CR2016 battery, follow these steps:

1. Press and hold the stem (the button on the side of the watch) until the display begins to flash.
2. Use the stem to cycle through the different settings: time, day, date, and year.
3. When you reach the setting you want to change, use the stem to adjust the value.
4. Once you have set the time, day, date, and year to the correct values, press the stem to exit the setting mode.

If you have trouble setting the time and date on your watch, you may want to consult the manual that came with the watch for more detailed instructions. If you do not have the manual, you may be able to find a copy online or you can try contacting Timex customer service for assistance.

annoyingmist, let me try.

1.by windy you mean mechanical?
2. if yes, then move the hands clockwise watching the calender until new date appears.
3. now turn hands anti- clockwise a little and clockwise again. Keep doing until you get today;s date.
4. set the watch to correct time. good luck.

Keep in mind that I dont have the watch in my hand... :-)

If this is an authentic Breitling...

You should have 2 buttons on the right with the crown between them. The crown screws down so you need to unscrew it before you attempt to set! Once unscrewed with gentle pressure pull the crown out. There should be 2 clicks, pull to 2nd click or furthest distance from case. That should be the time setting mode. Turn clockwise until the date changes then set your time. To change the date push back to the 1st click and that should be the date set mode. One direction will be for day and the opposite will be date. I believe that if you pull the crown back to 2nd click and push your buttons that should change the subdials for chrono. You might need to push both buttons at the same time.

Ive set Breitlings before but they arent a common watch we see. Most people dont use the Chrono so if the directions dont work for setting those then I wouldnt worry too much about it! Not many people are going to notice those. :-) Also be so very careful if its a real Breitling as they are a very expensive to fix! :-)

***DONT FORGET TO SCREW THE CROWN BACK DOWN OR YOU WILL GET WATER INSIDE THE WATCH!***

sir, there is no solution for this prolem.you will have to set it manually only. if you dont the default settings will be set.

Your BIOS backup battery is dead and needs to be replaced.
Go HERE for the manual , page 67.
And HERE is a link to the battery, or google 02k6502 if you dont like the price.
If that doesnt do it , its the motherboard.
Here are the codes from the manual.
163
(Time and date were not set.)
1. Set time and date.
2. System board.
173
(Configuration data was lost.)
1. Select OK in the error screen; then set the time and date.
2. Backup battery.
3. System board.


Hope that helps.

Locate your manual at the link below - it is there and it is free!
http://www.sharp.ca/manuals/
Do a reset (pressing the pictured button) and then reenter current information.

Please post back if you need more help, otherwise thank you for using and rating FixYa!

FIRST , go to MENU of camera and look for SETTINGS , DATE & TIME , if you dont see this option then refer to the camera manual to see if you have this option, some camras have this feature and some of them dont , hope this helps AJ

TO SET THE DATE:
===============
Press the MODE button until the Year is displayed.

Press SET button

(the YEAR starts to blink)

Press the MODE button to Increase the Year
Press HOUR button to increase the Month
Press MIN button to increase the Day



To Change between Fahrenheit and Celsius.

Press the MODE button until the Time field is blank
Press MIN button to toggle between Fahrenheit and Celsius.

I have to change my time/date everytime I change the batteries...sorry!