I am trying to install the Zoom H4 with Cubase LE4. Can't

Hello ! Actually what you do is download the latest firmware from the ZOOM page. Find HANDY H4 (you can Google that) and go to the Download tab. Follow all instructions. Be sure to have new batteries or be plugged in to AC while you reset. I've done it on my H4(I have 2) and H4n and it worked fine. Be patient, it takes a while once you start. Good luck !!

Your Windoows Vista MUST have Service Pack 1 installed. Check that SP1 is installed.

see if the manual has an answer http://www.manual-hub.com/manuals/zoom-h4n-01-pdf-manual

What latency do you have the Presonus set to? Too low of latency can cause this issue.

Hello.

Do you havce the manual to the H4? If not, I will provide you with a link to the PDF manual online. In thoroughly scanning thfe manual, there is no general reset function (in the manual, that is). It would be advised to call Zoom (who are very easy to work with) and ask them if there is a factory reset procedure which is not in the manual.

The manual for the H4 is very comprehensive, and there are default settings for many areas of the recorder. You could use this manual to reset your adjustments manually.

Here is the link to the manual:

http://www.samsontech.com/products/relatedDocs/H4_manual.pdf

Thanks for using FixYa

try resoldering the circuit board where the power socket is ... as there is a switch on the socket that disconnects the batterys

I have a H4 but not that problem. Have you tried recording when the H4 is charged? My guess is when low on battery, the H4 doesn't record.

Contact ZOOM ?

If you are using a Mac running Leopard (Sys 10.5), you need to upgrade the H4  firmware from Zoom website
http://www.zoom.co.jp/english/download/software/h4.php

You will need an external SD card reader.
Good Luck