How to fix? Dell mini inspiron 10. Its has a 8 beeps. Failure displays.

In most of the Inspiron laptops, '8 beeps' code is for the LCD failure. Pressing D and power button will initiate a diagnostics test on the LCD of your computer How to fix 8 beeps on Dell laptop within 1 minute YouTube

Hello Hardyjosef,
Below is the beep code chart for the mini 10 systems.
No POST
If the system does not perform a Power-On Self-Test, there are various things to look for:
1.Check that the system has a power light.
2.If the system has no power light, ensure it is plugged into AC power. Remove the battery.
3.If the system has power but is not performing a POST, Check for one of the following Beep code errors.
Beep Code Description Failure Coverage
1 BIOS ROM checksum in progress or failure. BIOS Chip Motherboard Failure or ROM Error
2 No RAM Detected No Memory Detected
3 Chipset Error (North and South Bridge Chipset, DMA/IMR/Timer Error for Intel platform); Chipset Error Motherboard Failure
Time-Of-Day Clock test failure.
Gate A20 Failure
Super I/O Chip Failure
Keyboard Controller Test Failure
4 RAM Read/Write Failure Memory Failure
5 RTC Power Fail. COMS Battery Failure
6 Video BIOS Test Failure Video Card Failure
7 CPU Cache test failure CPU Failure
8 LCD LCD Failure
4.With the power off and the system unplugged, remove all CRUs from the system and reconnect the AC adapter to the system and try again.
Try reseatting the memory to see if that will resolve the issue. If not, the motherboard may be bad and will need to be replaced. If you need another motherboard you can call the Dell Spare Parts Department at 1-877-717-3355 to purchase one.
Thank You,
Dell-Jesse L
Dell Social Media and Communities

do wut it tells u, check cable

"No memory modules detected"

You can check the documentation at the link below..has suggested troubleshooting..

http://support.dell.com/support/edocs/systems/insp531s/en/om/html/trouble.htm#wp1085300

Scroll down a bit and you will see "beep codes".

There are 3 mini 10 models sold by Dell. The Inspiron 1010 (Mini 10), Insprion 1012 (Mini 10) and the Insprion 1018 (Mini 10v). Depending on which model you have, you can try to connect an external monitor and see if you get a display. The 1012 and the 1018 have a 15 pin VGA plug on the left side of the laptop and the 1010 has an HDMI jack for video. If you get a display then your LCD display is bad and needs to be replaced.

A constant beep can mean that a key on the keyboard is stuck . test each key , it may loosen up.

Let me know....

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

To fix the issue we have to reinstall the software

Use the follwing link and do that

http://findtechhelp12.blogspot.com/2010/11/how-to-reinstall-os-in-dell-computer.html

If you can't access even the BIOS then it's a hardware fault - nothing you can do will fix that. It's time to take it to a repair shop.

Beep codes for the Inspiron Mini are as follows:

Beep Code Possible Problem
One Possible system board failure — BIOS ROM checksum failure
Two No RAM detected
NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly.
Three Possible system board failure — Chipset error
Four RAM read/write failure
Five Real Time Clock failure
Six Video card or chip failure
Seven Processor failure
Eight Display failure