How do i set the number of rings on our night line for Avaya Partner-18D?

SOURCE: Partner 18D System - Voicemail

Your telephone can be used on different Avaya phone systems and you can have different voice mail systems. They all program differently.

Someone should have administrative rights to the voice mail. They can delete voice mail boxes and create new ones or maybe just change the password. If you do not have a phone system administrator, you would need to determine what voice mail system and what phone system you have. All the manuals are available at www.avaya.com

Most likely you have a Partner ACS system but there are different versions. You could also use these phones on a Magix system and other Partner systems.

SOURCE: Voice Mail

1. Press Feature until the screen displaysRINGS, and the line you choose.
2. Press a number key (1 - 7) to select the number of times the line rings before the system answers. To select Toll Saver, press 8 (the machine to answer after 4 rings when you have no messages, after 2 rings when you have messages), or press 9 (the machine to answer after 6 rings when you have no messages, after 4 rings when you have messages).
3. Repeat Steps 1 and 2 to set the number of rings for the other line.
4. Press Stop when you are finished.

SOURCE: Lucent Partner 18D - stop ringing of line 2 at phone

From extension 10 or 11

Press feature 00
Left intercom
Left intercom
right intercom
enter your extension number
all lines that are programmed on your phone will light up.

Solid means immediate ring. Slow flash means delayed ring. Really fast flash means no ring.

Press the line you wish to not ring, 2 times.

Feature 00 when you are done.

SOURCE: Number of Rings Before Call Goes To Voicemail

From the system programming menu either in the pc programming tool or from the console phone enter into system programming, options,more, group coverage delay. set here from 1 ring to 9. Good luck.

If this was helpful please send me a rating.
Thanks Dan

george peters

• 860 Answers
• Posted on Nov 21, 2009

SOURCE: Lucent Partner 18D - Caller ID not working

The caller id information is sent from your local telco provider after the first ring and might not be able to be extended to the individual sets, try backing off the ring to answer on your voice mail from 2 to 3 rings to see if the information is then passed on. The Voice Messaging System message is being sent from the system showing who transfered the call to you. You should also notice that the ring pattern when that message is displayed is a standard ring followed by a beep meaning a transfer is taking place.