Printer error message on display - Epson Stylus CX3200 All-In-One InkJet Printer

Steps To Fix HP Printer is Displaying A 50.4 Error Message

1. First thing you have to do is to cancel all the pending printing jobs in the queue.
2. Now switch-off your printer and leave it for few seconds to cool it down.
3. After cooling down the printer completely, the fuser failure error appears on the display screen.

https://www.hpprintersupportpro.com/blog/hp-printer-is-displaying-a-50-4-error-message/


https://www.laserprinterservices.com/hperrorcodes.html
HP Printer Error Codes HP Laser Printer Error Code 13.4 paper jam 50.1 Bad Low Voltage Power Supply 13.5 Paper jam in the fuser 50.2 Fuser Error 13.6 Paper jam in the fuser 50.5 Fuser Error 13.20 jam in the paper feed drive 50.9 Fuser Error

There could be two problems

A minor error occurs and the machine is waiting an error to be cleared. Check the display message, and solve the problem referring to Understanding display messages, see page 11.3.The toner cartridge is low. Order a new toner cartridge; see Ordering supplies on page 12.1. You can temporarily improve print quality by redistributing the toner. See page 10.4.

For referring this page numbers, please download the manual from this link.

http://downloadcenter.samsung.com/content/UM/200812/20081215154056890/Guide_EN.pdf

The error message, which you have told me, not in the error message list. I think there is an internal failure for the printer. It is always recommend servicing your printer with authorized service centers. If the error message is not in the error list, owner cannot repair but, technician can repair the printer. I hope this information is useful for you. Thank you.

The Solution is simple: Unplug your printer then remove all the catridges then turn it on. Then the printer will display error indicating no catridges then put back the catridges then it will automatically reset your printer thats all folks...Please comment if it works for u...

HELLO

brother dcp-165c printer unable to clean , see troubleshooting and routine maintenance chapter in User's guide

Please get it downloaded here :
www.hp.com/cposupport/eschome.htm
www.brothersoft.com/downloads/hp-printer-driver.html
www.downloadatoz.com/driver/
Jay pnvbctrdcxq

my hp officejet 6310 printer just started displaying cartridge error. what should i do?

The printer frequently displays an error message and will have the pause light on

The following error message appears on the color graphics display after you insert a cartridge: Remove and Check Print Cartridges . The printer will not print. The message does not specify which cartridge has caused the error. Solution This error message indicates that the printer cannot determine which cartridge is causing the error. Follow the steps below to solve the problem.

1. Remove the color cartridge from the left stall (which has a blue latch) and refasten the latch. Leave the other cartridge in place.
2. Close the printer, wait 10 to 15 seconds, then look at the LCD display.
   • If the LCD display reads Insert Color Cartridge in Left Stall , the color cartridge may be causing the problem. Follow the steps below:
     1. Clean the color cartridge contacts.
     2. Reinsert the color cartridge into the carriage and close the blue latch.
     3. Close the printer and wait 10 to 15 seconds.
     4. If the LCD display reads Remove and Check Print Cartridges , replace the color cartridge.
   OR
   
   • If the LCD display reads Remove and Check Print Cartridges , follow the steps below:
     1. Reinsert the color cartridge.
     2. Remove the black or photo cartridge, depending on which one is installed in the right stall. The right stall has the gray latch. Be sure to refasten the latch on the empty stall.
     3. Clean the black or photo cartridge contacts.
     4. Reinsert the black or photo cartridge.
     5. Close the printer and wait 10 to 15 seconds.
     6. If the LCD display reads Remove and Check Print Cartridges , replace the black or photo cartridge.

1. Remove and then reinsert the cartridge indicated in the error message.
2. If the error is still displayed, clean the contacts.

1. If the error message is Error. Remove and Check Black or Photo Cartridge , the following steps may help:

1. Remove both cartridges, lower the latches, and close the printer access door.
2. Turn off the unit by pressing the On button on the front panel. Wait for the printer to completely shut down.
3. Turn the printer back on by pressing the On button.
4. When the message display reads Insert Print Cartridges , open the access door and replace the cartridges.

1. If neither of the steps above fixed the problem, either the cartridge or the printer is faulty

To determine whether this error is due to a cartridge failure or a hardware problem with the printer, do the following: Make sure the printer is powered on. Open the printer's top cover. The print cartridge carrier moves and stops at the loading position. Press down on the cartridge lever to raise the cartridge lid. Remove the cartridges. With the cartridges out of the printer, close the top cover. Power the printer OFF and then back ON. Check the operator panel to see if the 1203 error has returned or if a new message is displayed. If the message displayed is 1203, there is something wrong with the printer hardware. Please contact Lexmark Technical Support. If the message is Cartridge Missing, reinstall the cartridges into the printer. Insert the black cartridge in the left carrier. Insert the color cartridge in the right carrier. Snap the lids closed. Close the top cover. Check the operator panel. If the 1203 message is still present, you need to insert one cartridge at a time to determine which cartridge is producing the failure. With one cartridge in the carrier, close the top cover and check the operator panel. If the 1203 message is displayed, that cartridge is producing the error. If Cartridge Missing is displayed, the second cartridge is the defective item. Please replace the defective cartridge.