I have to keep recovering webpage on my q45 pc

Don't do anything with your clock.
and although this webpage starts with the same sentence, just read how you can recover your PC. That is as long as you did not empty your trash or deleted some serious stuff.
System Restore Microsoft Windows

Try checking your browsers add on settings. Disable flash and see if it works, maybe flash is corrupt. If this helps, remove the addon malfunctioning and reinstall it. Also update your browser to latest version.

http://support.microsoft.com/kb/923737

also disable plugins

If this does not fix the problem try
http://www.bleepingcomputer.com/download/adwcleaner/dl/125/

I’m happy to help further over the phone at https://www.6ya.com/expert/jonathan_828b54f422cbefdd

look into camshaft position sensor, i know of three sensors that will do this, throttle body, cam shaft, and timing. hope it helps

recovery in general gives a option to back up. If its windows, get a general back up in recovery (under control panel). Then format it. Or do a sysyem scan to check whether there are any bad sectors. But knowing a bad sector wotn do anything. best is to Back up --> format and see. ** Do it only if you have OS CD. Or else try Ubuntu

i'm sorry, i'm not sure what exactly you're asking.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

The only way to recover your combination is to go to the following website:

https://www.sentrysafe.com/CustomerCare/Lost_Your_Combination

If you have already registered on their website all you have to do is to login and then press the RECOVER COMBINATION button on the webpage. If you haven't registered then you need to send a notarized letter to the company stating you are the owner. They take their security very serious, and in keeping with that the notary who seals the letter must have a different last name than yours. You can download the letter from the above webpage. You can also press the MAIL/FAX REQUIREMENTS button to fin out where you need to send the letter or fax.

you will need to have it serviced, by removing dust interior and replacing the thermal greace on the cpu and gpu. it is overheating.

you have to turn the switch on and off, but dont crank, you will hear the fuel pump come on then go off, keep doing this for a few minutes and it should start

what are you trying to recover.IM me