Brother dcp 8060 reinstall paper tray error message

Brother DCP-330C paper jam

Yes. Just be sure to place them correctly in either the paper tray or in the Manual feed Slot.

Try this:
Clean the inside of the machine and the corona wire in the drum. If this does not solve your issue, replace the drum. Also, the paper tray ground terminal in the machine body may be dirty.Clean the contact with a dry cloth.

the printer needs to be clean and restore the factory settings

theres a paper tray at the bottom, you pull it out and put the paper in.

(the gray section at the bottom)

hope that helps :)

Jake

Hi Fliliya, The link below is a FREE 116 page user manual for a brother DCP-8060all in one, I hope it helps.......CHEERS..
https://www.encompassparts.com/shop/model_research_docs/?file=/BRO/om/DCP8060.pdf

sounds like you have a bad paper tray... contact brothers support to order another one...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

That error, usually means that the engine PCB is bad. If you call brother they'll tell you to check the print count, and if it's a certain number, all you can do is replace that PCB. It runs around $400.00.

on my DCP 130C display appear an errore message "imp. stamp 50". This is an error message in italian language that indicate impossible to print, error 50.
Please, have you some suggestion to resolve this problem?
Thansk in advance

Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud