I have a Namco plug+play TV game (PacMan, space invaders...). Sound good but picture terrible. Please HELP!

Absolutely, if your not electrically inclined take it to your local electric repair shop. It shouldnt cost much,

I have a plug and play multy pacman game I need to resoider some wires inside I need the wireing scamatics

my white cord is split can it be repaired?

if it has multible colors the yellow has to go to the green top plug and red and white go to the furthist away from the green plug.

i happen to have a namco museum for gamecube could it be that its for a different console

Hello: first thing is check the 5V+ 12V+ -5V in the power
supply, sometimes when the power supply goes low or
high cause that problem, other thing that you need check
is the connector for the logic, sometimes contacts get
black, use a eraser to clean the contacts, the last thing
is reseat all chips in the logic, the ones that are in sockets
Thank You..
Miguel

1.Check the dip switches for cocktail set up/ no upright.
2.does the screen flip to the player 2? if yes
3.make sure you have good dc ground in player 2 joystick.
4.if no picture flip for player 2, go to solution 1.
Thank You.

the input you plug it into....1-2-3 etc.

It might be a software issue, since the machine is so old. I recommend just blowing in the cartridge and praying it works like we used to do when we were kids! ;)

That or download the ROMs somewhere on the internet and play them on a PC. There's not much restoration you can do to a bad cartridge.

Are you talking about the little new thing you connect to a TV? That should be easy. Video plug to video input, and audio to audio :)
If you don't have video and audio inputs on your TV , you woll need to get a video modulator.

Let us know.