Question about Whirlpool AWM8163 Front Load Washer

2 Answers

Whirlpool AWM 8023 -error F06

Hi, Does anyone know what the error F06 means when it comes to a Whirlpool AWM 8023 (washing machine)? Is it an electrical error? How bad is it? Thank you in advance. Glenn

Posted by on

  • Anonymous Mar 15, 2014

    Hi, Unable to turn wash knob. It is stuck on cycle 10. Any suggestions to try? Thank you.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 87 Answers

This erroe code means drive motor tackometer error Probably a bad motor or motor drive pc board or cable problems

Posted on Jun 08, 2007

Ad

I had this same problem, an intermittent F06 fault.  After some searching, I did manage to fix it.  If this error code happens to you and you know a bit about electronics, try taking apart the timer and looking for dry joints between the main board and the perpendicularly-mounted microprocessor board. Over time vibration can cause the soldered joints between the two boards to crack and fail intermittently. 10 minutes to disassemble plus 2 minutes with a soldering iron could save you a $400 repair bill.

Posted on Jul 16, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can anyone tell me what F06 error code means on the whirlpool 6th sense 10kg washer? and what to do about it as the screen is flashing but the door to the machine is locked. Thanks


F06 Drive motor tachometer error This error occurs when the main control unit fails to detect the motor speed from the tachometeric generator fitted to the motor either through an incorrect resistance or the tacho is not correctly fitted into place. The machine will try to detect the reading several times before aborting the program ans shutting down with this error being displayed.
When checking ensure that the drive belt and belt tension are okay as this can cause this error.
  • Check tacho resistance
  • check tacho placement
  • Check wiring for shorts
  • Check wiring harness connections between motor and main controller
  • Check drive belt for damage and tension
http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3708-whirlpool-washing-machine-fault-codes.html

May 26, 2015 | Whirlpool Washing Machines

1 Answer

Whirlpool awm 9000 I bought a used Whirlpool


The error code F/H for this machine means that the drain pump is blocked. Look at your manual for how to access the drain pump and clean it out. This will resolve your issue.

Oct 18, 2013 | Washing Machines

1 Answer

Whirlpool duet washer-error F06 and E02


Unfortunately F06 E02 is a very bad error. It means you have an interface communication error. That means that the main control board isn't communicating with the front interface control board. You can pull the washer out and remove the 3 screws coming in from the back of the top panel. Next, the top panel will pull straight back, up, and off. Now check all the wire connections between the two control board and make sure they are all secure. If everything looks good, then the interface control board will need to be ordered and replaced.
Here is a link to the part.

Oct 19, 2012 | Whirlpool Duet Steam WFW9750WR Washer

1 Answer

What is that an error F06 for Wirlpool awm 1000 ex


Hi from retired Englishman in SW France,

Whirlpool's 'F06' suggests that there is a problem with the motor speed- no motion detected, sorry. Looks like a service call ;-0(

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Sep 04, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Getting faulf code F06 on Whirlpool 6th Sense AWM 8143


Hi There
I have found what you looking for and i hope this help's yo. let me know.
F/06 Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.
  • Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the Drive Motor
  • Check the MCU
  • Check the Wire Harness
Thank you for writing to fix ya.
Best regards Richard

Dec 11, 2009 | Whirlpool Washing Machines

2 Answers

Error code f06


hello fo6 means drive motor techometer error check wire harness connections between the drive good luck




shaun

Mar 22, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Whirlpool awm 8125/3 fault code FH


Probably too late, but here it goes:
FH means some cicle is taking too long time.
Replace the inlet electrical valve. It probably wont open enough and the water flow is not enough to fill to level in time. This should cost you 10€ and is easily done by anyone.
Just remove the top of the machine (two bolts on the rear and slide to the back), disconnect the valve (electrical and water input and output), push the lockers and twist the valve free.

Feb 07, 2009 | Whirlpool AWM8123 Front Load Washer

2 Answers

F 19 error on Whirlpool AWM 8085


F15 - Motor Control Unit (MCU) Error - Disconnect power and unplug unit to check wire harness connections to the motor, MCU, and Central Control Unit (CCU).
Check the drive belt and reconnect power and plug unit in.
Check the MCU by looking for operations of the drive motor and check the drive motor for powered rotations.
Replace failed component.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Dec 01, 2008 | Whirlpool AWM8163 Front Load Washer

3 Answers

Whirlpool 6th sense front loader awm 8121


my whirlpool 6th sense will not start all lights and power i think that it is the door sensor at fault? The green light door locked light is not on.

Jul 18, 2008 | Whirlpool AWM6100 Front Load Washer

Not finding what you are looking for?
Whirlpool AWM8163 Front Load Washer Logo

Related Topics:

3,683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...